Device display
The Multi RS has an LCD screen that displays operational information.
Inverter state: This shows when the Multi RS is inverting. Power output, Frequency, and AC voltage. |  |
AC input state: This shows the state of the AC input. Power input, Frequency, and AC voltage are shown. The bottom line shows the status of the AC input relay. |  |
Battery:
Battery Power (charging shows positive number, discharging shows negative number), Current, DC voltage, Temperature (*), State-of-charge (*) and Time-to-go (*). Battery state (e.g. discharging, bulk, absorption, float, etc).
Battery state: The second line of the display shows the status of the battery, as measured at the battery terminals of the Multi RS itself. These values don't account for other charge sources or loads in the wider system. Battery power, battery voltage and current. The third line of the display shows the battery temperature and state of charge. These values may come from the system battery monitor if available. |  |
Negative values indicate battery discharge. The bottom line shows a battery status of "Discharging". |  |
Solar:
If you have an AC PV inverter connected, then its power and yield will be displayed. |  |