Differences

This shows you the differences between two versions of the page.

--- vrm_portal:dashboard [2022-03-14 10:52] – guystewart
+++ vrm_portal:dashboard [2022-04-14 09:35] – [3. Control your devices in VRM] guystewart
@@ Line 116: / Line 116: @@
 ===== 3. Control your devices in VRM =====
-VRM offers control over some of your Victron devices, straight from the VRM dashboard. With this feature, you can quickly adjust the settings of your inverter, ESS or relay switches, without needing to open the remote console.
+VRM offers control over some of your Victron devices, straight from the VRM dashboard. With this feature, you can quickly adjust the settings ESS or relay switches, without needing to open the remote console.
 To access it, head to your VRM dashboard.
@@ Line 126: / Line 126: @@
 {{:vrm_portal:vrm-controls-1.jpg?800|}}
-{{:vrm_portal:vrm-controls-2.jpg?800|}}
+{{:vrm_portal:vrm-controls-2-revised.jpg?800|}}
-==== 3.1 Inverter controls in VRM ====
-The AC input current limit of the grid can be adjusted. For this, you can either select one of the pre-defined values, or enter your own input limit preference in amps.
+==== 3.1 Inverter controls in VRM ====
-Changing the inverter mode is also possible in VRM. You can switch between charger or inverter only, turning it on or off.
+Note - while initially available, inverter controls have since been removed and are not currently accessible via the controls feature.
-After selecting a change to the inverter mode, you will get 5 seconds to cancel the request. After this, the change is sent to the device.
-{{:vrm_portal:vrm-controls-3.jpg?400|}}
 ==== 3.2 ESS controls in VRM ====