ng by Product ID on VE.Direct connections
Online Firmware Library
* iOS: Fix issues with Online Firmware Library when VictronConnect is updated to a newer version
* Fix lastest firmware aren't shown when clicking "Update" on the Produc... * GX/Mqtt connection (new feature - requires new firmware not released yet and Venus OS v3.70)
* EVCS c
====== Remote firmware update for BMS-Can batteries via VRM ======
===== 1. Introduction =====
This manual describes how to remotely update firmware on third-party BMS-Can managed batteries via the ... s.
Features:
- Remotely update BMS-Can battery firmware straight from the [[https://vrm.victronenergy.com... ortal → VRM Portal must be enabled.
* GX device firmware version **[TBD: minimum version]** or later
* V
ktop, not in tablet view
=== 2024-11-28 ===
* Firmware files upload: Limit maximum number of firmware file chunks in flight to prevent GX device from becoming ove... e device list and alarms
* Event logs: Failed firmware updates now also log the error code
* Event l... nticated) Redis instance
=== 2024-08-26 ===
* Firmware update: Prevent empty error modal from showing af
======= Remote VE.Bus firmware updates =======
===== 1. Introduction and limitations =====
==== 1.1 Intro... ====
This feature allows remotely updating the firmware of Victron inverter as well as inverter/charger. ... keep your Victron equipment updated to the latest firmware version. Stable systems should be left with their current firmware. Firmware updates should only be done when it is
ase of problems, update all devices to the latest firmware. This includes the latest VE.Bus firmware and also the latest firmware in the [[venus-os:start|GX device]].
Firmware update instructions:
- [[updating_firmware:updating_ve.bu
you do see this error, then update to the latest firmware.
If you then still have the error, perform a res... . So when doing an update, it might look like the firmware update caused this issue; but it doesn't. The Sol... er RS and Multi RS products.
Please upgrade your firmware to at least v1.08 as the issues causing this error have been addressed.
If you are using firmware v1.08 or newer this error indicates that the inte
hat can be used for three things:
- Update the firmware of a VE.Can product connected via USB to your com... ASS030532000)
- (deprecated) Remotely updating firmware of a VE.Can product (requires an internet connect... s:start|GX device]]). Use the [[vrm_portal:remote-firmware-update|new mechanism]] instead.
- (deprecated) ... o not use VE Power Setup. Instead, use the remote firmware update feature (second option in above list) inst
====== Updating VE.Bus firmware, using VEFlash ======
===== VEFlash is deprecated in favour of VictronConne... o use, we now recommend to use VictronConnect for firmware updates. Instructions in the [[https://www.victro... attempted by system Owners and Users.**
Updating firmware on a VE.Bus product (Inverters, Multis and Quattr... guration.
These instructions are for the VEFlash firmware update method, it is also possible to update [[ht
rrors and descriptions.
Check [[#problems_during_firmware_updating|chapter 10.3]] of this manual for Troubleshooting firmware updates. When asking for help, make sure to alway... | D29 | Could not start updating, the firmware file is corrupt. |
| D31 | Updating f... | D33 | Could not start updating, the firmware file is not found. |
| D90 | Could no
====== VRM: Remote firmware update ======
===== 1. Introduction =====
This manual describes how to remotely update firmware. This functionality requires the device to be upd... top, tablet & phone
- No need to find the right firmware file: the system has all, and will clearly indica... al -> VRM Portal must be enabled.
Note that for firmware versions prior to v3.50, the required setting is
500 kbit/s.
It is recommended to use the latest firmware version on new installations and when trouble sho... models are compatible ===
The minimum supported firmware version for VE.Bus models is 469. These inverter/... a the VE.Bus connection port.
Minimum supported firmware for Inverter RS and Multi RS models is 1.16, and ... .Can (250kbps) interface.
Updating to the latest firmware is recommended for new installations, and trouble
B-Box Pro series batteries, the minimum supported firmware version for the [[venus-os:start|GX device]] is v... remium LV series, the minimum supported GX device firmware version is v2.52. It is recommended to use the latest firmware version on new installations and when trouble sho... models are compatible ===
The minimum supported firmware version is 469. Updating to the latest firmware i
multi as a Hub2 system. The following program and firmware versions are used:
| \\ VEConfigure 3 Rev. 90.04.169 \\ \\ ECOmulti firmware 2610304 \\ \\ Color Control GX rev. 1.14 \\ \\ |
... uring the ECOmulti and "VEFlash" for flashing the firmware. After installing, start the utilities with a wor... he MK2USB interfcae.
===== Check for a possible firmware upgrade =====
The ECOmulti will be delivered in
.12kWh | 3.55 kWh | Coming soon |
| Minimum Venus firmware | v3.50 | v3.50 | v3.50 | v3.50 | v3.50 | v3.50 |... e system.
For new systems, the minimum required firmware version for the [[https://www.victronenergy.com/l... v2.42. It is highly recommended to use the latest firmware version on all connected devices, including the G... d inverter/chargers are compatible.
The minimum firmware version for new installations is 469. Though [[ht
ANT:**
* Always update all units to the latest firmware version during commissioning of the system: ([[updating_firmware:updating_ve.bus_products|firmware update instructions]]).
* Note that some parts of the description below apply only to firmware version 400 and later.
* All units in one syste
