Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2020-03-26 08:13] – [3. Wiring] mbosma
+++ venus-os:mfd-raymarine [2020-03-26 17:05] – [1. Introduction] mvader
@@ Line 3: / Line 3: @@
 ===== 1. Introduction =====
+This document explains how to connect to Raymarine MFDs using an Ethernet connection.
 The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]] by Raymarine.
+TThere is also another way to connect, which by NMEA2000. See the [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
 ===== 2. Compatibility =====
@@ Line 22: / Line 24: @@
   * A80513 - RayNet male to RJ45 adaptor cable
-Connecting a Axiom MFD to a network router might lead to IP address conflicts, due to the integrated DHCP server.
+Connecting a Axiom MFD to a network router lead ls to IP address conflicts, due to the integrated DHCP server.
-To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet, it is recommended to use Wi-Fi.
+To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use WiFi
 ===== 4. Configuration =====
 On the Victron GX Device, go to Settings → Services, and there enable both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).