ve.can:nmea-2000:start
Differences
This shows you the differences between two versions of the page.
Previous revisionNext revision | |||
— | ve.can:nmea-2000:start [2020-05-20 14:23] – [1. Introduction] marmour | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== NMEA 2000 & MFD integration guide ====== | ||
+ | |||
+ | ===== 1. Introduction ===== | ||
+ | |||
+ | This technical document explains how to integrate a Victron system onto a Marine MFD, such as those from Garmin, Raymarine Navico and other brands. | ||
+ | |||
+ | There are multiple ways to integrate, so make sure to closely read the complete introductory chapter to find the best method for your type of system. | ||
+ | |||
+ | === Systems with a GX Device === | ||
+ | |||
+ | For most installations and integrations, | ||
+ | |||
+ | - the (simpler) plug and play like method uses an Ethernet connection, which enables the MFD App. Available for [[https:// | ||
+ | - in an the NMEA2000 network. See the [[https:// | ||
+ | |||
+ | Both connections can be made and used at the same time, and each has its advantages and disadvantages. The MFD App is by far the simplest and plug and play-like method. It presents an easy to use system overview without requiring any configuration. The NMEA 2000 integration on the other hand, whilst being more complex, allows more customisation on the MFD: the data will show up in the data-tree of the MFD, and most MFDs then allow the user to configure various pages and combinations of information. This is not so with the MFD App, as the only available settings are to show or hide battery parameters (Voltage, SOC, Current) as well as naming the batteries. | ||
+ | |||
+ | Note that, besides making information available on NMEA 2000, a GX Device can also read tank level data from NMEA 2000. More information in [[https:// | ||
+ | |||
+ | === Direct connection - products with a VE.Can port only === | ||
+ | |||
+ | Some of our products feature a VE.Can port; and can thus be directly connected to the NMEA 2000 network. No electronic converter necessary; only a plug conversion cable, the [[https:// | ||
+ | |||
+ | === Using our converter interfaces (DEPRECATED!) === | ||
+ | |||
+ | * [[https:// | ||
+ | * [[https:// | ||
+ | |||
+ | Note that the use of both those interfaces is deprecated. Use a GX Device instead. | ||
+ | |||
+ | === What is NMEA 2000? === | ||
+ | |||
+ | NMEA 2000 is a plug-and-play communications standard used for connecting marine sensors and display units within ships and boats. | ||
+ | |||
+ | Victron Energy is a member of the NMEA 2000 organisation, | ||
+ | |||
+ | For brevity, this document will refer to NMEA 2000 as N2K. | ||
+ | |||
+ | === Modbus-TCP Integration === | ||
+ | |||
+ | For larger vessels, using custom designed SCADA systems, the recommended protocol to use is ModbusTCP. See our [[ccgx: | ||
+ | |||
+ | ===== 2. Varia ===== | ||
+ | |||
+ | |||
+ | ==== 2.1 VE.Can products (Skylla-i, Skylla-IP44, | ||
+ | |||
+ | Since the Victron VE.Can communication protocol is based on N2K, the following products can all be connected directly to a N2K network. The only thing necessary is a plug converter: the [[https:// | ||
+ | |||
+ | * Skylla-i 24V Battery Chargers | ||
+ | * Skylla IP44 Battery Chargers | ||
+ | * Lynx Shunt Battery Monitors | ||
+ | * Lynx Ion + Shunt all models | ||
+ | * SmartSolar MPPT Solar Chargers with VE.Can communications port | ||
+ | {{ : | ||
+ | |||
+ | |||
+ | |||
+ | ==== 2.1 Raymarine & EmpirBus ==== | ||
+ | |||
+ | Besides using NMEA 2000 and/or the Lighthouse App, integration onto Raymarine MFDs can also be done with an [[http:// | ||
+ | |||
+ | In the [[http:// | ||
+ | |||
+ | Next, use the [[http:// | ||
+ | |||
+ | The EmpirBus system requires the data instance of battery status and dc detailed status to be unique when using multiple sources. ([[ve.can: | ||
+ | |||
+ | |||
+ | ==== 2.2 Maretron ==== | ||
+ | |||
+ | All data sent out by Victron devices can be picked up by the Maretron MFDs & software. See the [[http:// | ||
+ | |||
+ | ===== 3. PGN overview ===== | ||
+ | |||
+ | Refer to our [[https:// | ||
+ | |||
+ | ===== 4. FAQ ===== | ||
+ | |||
+ | Note that there are many more generic frequently asked questions answered in the [[https:// | ||
+ | |||
+ | ==== Q1: What about instances? Device instances, data instances? ==== | ||
+ | |||
+ | See [[ve.can: | ||
+ | |||
+ | ==== Q2: Can MPPT Solar Chargers with a VE.Direct port also be connected? ==== | ||
+ | |||
+ | No, they cannot be connected. Even though the [[https:// | ||
+ | |||
+ | Similarly, also a GX Device does not (yet) transmit data from connected Solar Chargers on its NMEA2000-out port. | ||
+ | |||
+ | ==== Q3: What about terminators and network layout? ==== | ||
+ | |||
+ | A N2K CAN bus network needs to be laid out as in a backbone configuration, | ||
+ | |||
+ | * Use the NMEA 2000 cable as the backbone. | ||
+ | * Run a separate drop cable separately to each Victron device. The drop cable will be one of these three products: | ||
+ | * [[https:// | ||
+ | * [[https:// | ||
+ | * [[https:// | ||
+ | * Only terminate the NMEA 2000 backbone, do not terminate on the VE.Can side. | ||
+ | |||
+ | ==== Q4: What PGNs does a GX Device transmit on N2K? ==== | ||
+ | |||
+ | See the [[https:// | ||
+ | |||
+ | ==== Q5: Can integration onto Raymarine displays also be done without Empirbus NXT? ==== | ||
+ | |||
+ | Yes, see [[https:// | ||
+ | |||
+ | ==== Q6: What about Maretron and other brand tank sensors on the Ccgx? ==== | ||
+ | |||
+ | See chapter 1.4.7 in the [[ccgx: | ||
ve.can/nmea-2000/start.txt · Last modified: 2022-03-16 12:19 by stefanie