Differences

This shows you the differences between two versions of the page.

--- open_source:ccgx:commandline [2021-03-02 09:30] – [4.4 vreg: changing settings from the command line] mvader
+++ open_source:ccgx:commandline [2021-03-03 11:46] – [4.4 vreg: changing settings from the command line] mvader
@@ Line 344: / Line 344: @@
 </code>
-Example of switching a solar charger off, and then on
+Switching all devices on VE.Can off (careful, when having NMEA2000-out enabled, or having an Inverter RS, also AC will be switched off!):
 <code>
-OFF: (vreg 0x0200, value 4)
+vreg -c socketcan:can0 -s 0x0200 un32:0x000004
-ccgx:~# vreg -n 0x45 -s 0x0200 un8:0x04
+</code>
-# NAD 0x45, reg=0x200
-x04 0x00 0x00 0x00
-ON: (vreg 0x0200, value 1)
+switching a specific device off:
-root@ccgx:~# vreg -n 0x45 -s 0x0200 un8:0x01
+<code>
-# NAD 0x45, reg=0x200
+vreg -c socketcan:can0 -s 0x0200 un32:0x000004 -n 0x24
-x01 0x00 0x00 0x00
-root@ccgx:~# vreg -n 0x45 -s 0x0200 un8:0x03
 </code>
+Note that in above example the VREG data field (un32) is padded with zeros; current firmware requires that, future fw won't any more.
+Switch a specific device on:
+<code>
+vreg -c socketcan:can0 -s 0x0200 un32:0x000001 -n 0x24
+</code>
+Seeing which devices are off and which are on goes like this. Press ctrl-C to stop the command.
+<code>
+vreg -c socketcan:can0 -g 0x200 -r
+</code>
 ===== 5. VE.Direct products =====