User Tools

Site Tools


ccgx:pump_start_stop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ccgx:pump_start_stop [2016-08-08 16:25]
mvader [Mobile/automotive overview]
ccgx:pump_start_stop [2019-01-22 10:42] (current)
Line 4: Line 4:
 ===== Introduction ===== ===== Introduction =====
  
-The CCGX internal ​relay can be used to start a pump. +The CCGX has a relay - switch - which can automatically ​start a pump. The switch is triggered by 'tank level' data, received from a tank-sender. The level at which the switch is automatically tripped is user-definable. 
-With this functionality you can open or close the relay based on a tank level.+==== Boat & Motorhome overview ====
  
-==== Marine & Mobile/​automotive ​overview ​====+An additional Overview page is available which shows at-a-glance status information from all tanks connected to the CCGX. To enable the tank overview ​page from the main menu go to: Settings -> Display and language -> Show boat and motorhome overview. You will now find that '​Mobile'​ has been added to CCGX '​homepage showing: '​Overview'​ and '​Tiles'​. ​
  
-On this overview you can easily see all the attached tank sensors levels and control a pump. It is also posible to change Multi/​Quattro AC current limit and mode when available.+It is also posible to change Multi/​Quattro AC current limit and mode when those functions are available.
  
 {{:​drafts:​mobileoverview.png?​direct|}} {{:​drafts:​mobileoverview.png?​direct|}}
  
-To enable this overview, go to Settings -> Display & Language 
  
 ==== Enable pump start/stop ==== ==== Enable pump start/stop ====
-To enable the pump start/stop functionality go to Settings->​ Relay and set the function to "Tank pump", once enabled the tank pump configuration page will be available.+To enable the pump start/stop functionality go to Settings ->Relayand set the function to "Tank pump"​. ​
  
 {{:​drafts:​pumpstartstop-relay.png?​direct|}} {{:​drafts:​pumpstartstop-relay.png?​direct|}}
- 
 ==== Configuration ==== ==== Configuration ====
-Pump start/​stop ​configuration page is located in Settings -> Tank pump.+Once enabled the tank pump configuration page will be found at: Main Menu ->Settings ->Tank pump.
  
 {{:​drafts:​pumpstartstop-config.png?​direct|}} {{:​drafts:​pumpstartstop-config.png?​direct|}}
-{{:​drafts:​pumpstartstop-modes.png?​direct|}} 
-{{:​drafts:​pumpstartstop-list.png?​direct|}} 
  
-**Mode:**+==== Mode ==== 
   * **Auto:** Start and stop the pump based on level settings   * **Auto:** Start and stop the pump based on level settings
   * **On:** Pump always on   * **On:** Pump always on
   * **Off:** Pump always off   * **Off:** Pump always off
  
-**Tank sensor**:+ 
 +{{:​drafts:​pumpstartstop-modes.png?​direct|}} 
 + 
 +==== Tank sensor ​==== 
 Select which sensor will be monitored to start/stop the pump when the "​Auto"​ mode is enabled. ​ Select which sensor will be monitored to start/stop the pump when the "​Auto"​ mode is enabled. ​
 +
 +{{:​drafts:​pumpstartstop-list.png?​direct|}}
 +
 +
 +==== Pump auto-start levels ====
 +
  
 **Start level:** When the tank level reaches this value the pump will be started. **Start level:** When the tank level reaches this value the pump will be started.
ccgx/pump_start_stop.txt · Last modified: 2019-01-22 10:42 (external edit)