Differences

This shows you the differences between two versions of the page.

--- ccgx:modbustcp_faq [2020-01-06 14:53] – [6. Error codes and trouble shooting] iburger
+++ ccgx:modbustcp_faq [2020-02-06 21:16] – [6. Error codes and trouble shooting] mvader
@@ Line 95: / Line 95: @@
 ^Code^Name^Description^
 |0x01|IllegalFunction|The requested function is not supported.|
-|0x02|IllegalDataAddress|The Unit-ID is available, but one or more of the requested register(s) does not exist.|
+|0x02|IllegalDataAddress|The requested Unit-ID is available, but one or more of the requested register(s) does not exist.|
 |0x03|IllegalDataValue|The requested quantity of registers is invalid. See the modbus specs, http://www.modbus.org/specs.php, for the limits per function code.|
-|0x0A|GatewayPathUnavailable|Unit-ID is defined in the mapping list, but there is no device found on the mapped port. Double check the Unit-ID mapping list in the excel sheet, and make sure that the device is properly connected to the CCGX, switched on, and that its data is available on the CCGX display.|
+|0x0A|GatewayPathUnavailable|The requested Unit-ID is defined in the mapping list, but there is no device found on the mapped port. Double check the Unit-ID mapping list in the excel sheet, and make sure that the device is properly connected to the CCGX, switched on, and that its data is available on the CCGX display.|
 |0x0B|GatewayTargetDeviceFailedToRespond|Requested Unit-ID not found in the mapping list. Double check the Unit-ID mapping list in the excel sheet.|