Skip to main content

smallBMS with pre-alarm

1. Safety precautions

In this section:

Caution

  • Installation must strictly follow the national safety regulations in compliance with the enclosure, installation, creepage, clearance, casualty, markings and segregation requirements of the end-use application.

  • Installation must be performed by qualified and trained installers only.

  • Carefully study the product manuals of all connected devices before installing them.

  • Switch off the system and check for hazardous voltages before altering any connection.

  • Do not open the lithium battery.

  • Do not discharge a new lithium battery before it has been fully charged first.

  • Charge a lithium battery only within the specified limits.

  • Do not mount the lithium battery upside down or on its sides.

  • Check if the lithium battery has been damaged during transport.