Differences

This shows you the differences between two versions of the page.

--- victronconnect:mppt-solarchargers [2019-12-12 17:32] – tabreu
+++ victronconnect:mppt-solarchargers [2020-02-03 14:42] – tabreu
@@ Line 54: / Line 54: @@
 (If you are operating an [[http://https://www.victronenergy.com/live/ess:design-installation-manual|ESS]] (Energy Storage System) the charge time for this will be included in the 'Bulk' reading.)
-It is possible to export the history by clicking the three connected dots at the top right of the history screen.
+It is possible to export the history as a comma separated file (.csv) by clicking the three connected dots at the top right of the history screen:
+{{:victronconnect:history_export.jpg?direct&175|}}
+This is an example of the exported data for 3 of 30 days:
+^Days ago^Yield(Wh)^Max. PV power(W)^Max. PV voltage(V)^Min. battery voltage(V)^Max. battery voltage(V)^Time in bulk(m)^Time in absorption(m)^Time in float(m)^Last error^2nd last error^3rd last error^4th last error^
+|0|14500|2167|118.80|51.34|52.99|748|0|0|0|0|0|0|
+|1|15450|2326|118.81|51.68|53.97|869|0|0|0|0|0|0|
+|2|12350|2925|126.67|51.73|55.42|872|0|0|0|0|0|0|
 **Battery Voltage**\\
@@ Line 190: / Line 202: @@
 The configured coefficient is in mV per degree Celsius for the whole battery bank, not per cell. The base temperature for the compensation is 25°C (77°F), as shown in the chart below.
-{{ :victronconnect:temperature_compensation_internal.png?350|Battery voltage adjustment based on internal temperature measurement}}
+{{:victronconnect:tempcomp_-graph.png?350|Battery voltage adjustment based on battery temperature (14.4V as setpoint, compensation factor = 16.2mV/ºC)}}
 With a [[:smart_battery_sense_manual|Smart Battery Sense]] is installed; the actual battery temperature will be used for compensation; throughout the day.