User Tools

Site Tools


venus-os:mfd-raymarine

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
venus-os:mfd-raymarine [2019-11-17 15:18]
mvader [5. Configuring Multiple Battery Monitors]
venus-os:mfd-raymarine [2020-03-26 17:05] (current)
mvader [1. Introduction]
Line 3: Line 3:
 ===== 1. Introduction ===== ===== 1. Introduction =====
  
-The integration technology used is called [[http://​www.raymarine.com/​multifunction-displays/​lighthouse3/​lighthouse-apps.html|LightHouse Apps]].+This document explains how to connect to Raymarine MFDs using an Ethernet connection. 
 +The integration technology used is called [[http://​www.raymarine.com/​multifunction-displays/​lighthouse3/​lighthouse-apps.html|LightHouse Apps]] ​by Raymarine.
  
 +TThere is also another way to connect, which by NMEA2000. See the [[https://​www.victronenergy.com/​live/​ccgx:​start#​marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
 ===== 2. Compatibility ===== ===== 2. Compatibility =====
  
Line 22: Line 24:
   * A80513 - RayNet male to RJ45 adaptor cable   * A80513 - RayNet male to RJ45 adaptor cable
  
 +Connecting a Axiom MFD to a network router lead ls to IP address conflicts, due to the integrated DHCP server. ​
 +
 +To connect the [[https://​www.victronenergy.com/​live/​venus-os:​start|GX device]] to the internet as well, use WiFi
 ===== 4. Configuration =====  ===== 4. Configuration ===== 
-On the Victron GX Device, go to Settings → Services, and there enable MQTT.+On the Victron GX Device, go to Settings → Services, and there enable ​both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
  
 Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name. Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
  
 No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server. No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server.
- 
 ===== 5. Configuring Multiple Battery Measurements ===== ===== 5. Configuring Multiple Battery Measurements =====
  
venus-os/mfd-raymarine.1574000339.txt.gz · Last modified: 2019-11-17 15:18 by mvader