Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2021-12-09 09:49] – [7. NMEA 2000] mvader
+++ venus-os:mfd-raymarine [2023-04-13 20:50] – [7. NMEA 2000] mvader
@@ Line 34: / Line 34: @@
 :!: It is not possible to use a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]], due to the integrated DHCP server in the Axiom MFD.
+**Note: As of Raymarine LightHouse v3.15, there is an option to toggle DHCP. Disabling this option does not mean that the Axiom MFD will work with third party network routers. See [[https://community.victronenergy.com/questions/45414/raymarine-victron-app.html?childToView=114335#comment-114335|this]] post on Victron Community for more information.**
 ===== 4. Configuration =====
 On the Victron GX Device, go to //Settings → Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.
@@ Line 62: / Line 64: @@
 {{youtube>dAfJy5d_vcA?large}}
-After connecting the Ethernet cable the GX device receives an IP number (10.x.x.x) from the Axiom DHCP.
+After connecting the Ethernet cable the GX device receives an IP number from the Axiom DHCP.
 If you start the Victron App on the Axiom and it shows "hardware devices not found", just restart the Axiom and see... it works!
 ===== 7. NMEA 2000 =====
@@ Line 70: / Line 72: @@
 This chapter explains the specifics of NMEA2000 when connecting Victron to a Raymarine MFD.
-=== Generic and supported PGNs ===
+=== 7.1. Generic and supported PGNs ===
 To setup the data sources on the Raymarine, go to //Settings > Network > Sources > Advanced...//
@@ Line 78: / Line 80: @@
   * 127505 - Fluid level (tank levels)
   * 127506 - DC Detailed Status (State-of-charge, Time-to-go)
+  * 127507 - Charger status
   * 127508 - Battery Status (Battery Voltage, Battery Current)
+  * 127509 - Inverter status
 This PGN is not supported by Raymarine:
   * J1939 - AC data
-When the NMEA2000/STNG network has GPS data the GX device sees this as a GPS source and is able to use the GPS position in VRM.
+When the NMEA2000/STNG network has GPS data, the GX device sees this as a GPS source and is able to use the GPS position in VRM.
-=== Raymarine only: data instances need to made unique ===
+=== 7.2. Instancing requirements when using Raymarine ===
-If there are more than 1 (for example) SmartShunts in the NMEA2000 network, or a Solar Charger and a SmartShunt, then the Data instances of the Victron PGNs related to DC power need to changed to make each data instance unique.
+Fluid instancing details:
-See here for how to do that: [[https://www.victronenergy.com/live/ve.can:changing_nmea2000_instances|Changing NMEA2000 Instances]], section Data instances. This requires an [[https://actisense.com/products/ngt-1-nmea-2000-to-pc-interface/|Actisense NGT-1 NMEA to USB interface]].
+    * Raymarine i70: max number of tank levels is 5; fluid instance 0-4 and type must be fuel.
+    * Raymarine i70s: max number of tank levels is 5; fluid instance 0-4 and type must be fuel.
+    * Axiom MFDs: per Lighthouse version 4.1.75, a maximum of 16 tanks can be connected; fluid instance 0-15.
-**Note**: this requirement of data instances being globally unique for a PGN is specific to Raymarine. Other brands do not require this. And, although perhaps besides the point, also the NMEA2000 standard does not require it. More specifically, it says: "Data instances shall be unique in the same PGNs transmitted by a device. Data instances shall not be globally unique on the network.".
+==== LightHouse 4.1.75 and newer versions ====
+As of LightHouse version 4.1.75, the battery instances no longer need to be unique. This means that you can leave the battery instance to its default value, which is typically set to 0. The batteries are automatically detected by the Axiom display.
+==== LightHouse 4.1.74 and prior versions ====
+If there are more than 1 (for example) SmartShunts in the NMEA2000 network, or a Solar Charger and a SmartShunt, or any other device that transmits the same type of PGNs, then the Data instances of those PGNs need to changed to make each data instance unique.
+Typically this concerns the Battery instance, used in the Battery Status and DC Detailed PGNs.
+See here for how to do that: [[https://www.victronenergy.com/live/ve.can:changing_nmea2000_instances|Changing NMEA2000 Instances]], section Data instances. This requires an [[https://actisense.com/products/ngt-1-nmea-2000-to-pc-interface/|Actisense NGT-1 NMEA to USB interface]].