Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2020-06-11 17:30] – [4. Configuration] mbosma
+++ venus-os:mfd-raymarine [2020-06-25 17:34] – mbosma
@@ Line 26: / Line 26: @@
   * A80513 - RayNet male to RJ45 adaptor cable
-Connecting a Axiom MFD to a network router lead ls to IP address conflicts, due to the integrated DHCP server.
+To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use Wi-Fi. If the Axiom MFD is connected to internet (using Wi-Fi), it will automatically share its connection with the GX device over ethernet.
-To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use WiFi
+:!: Connecting a Axiom MFD to a network router over Ethernet leads to IP address conflicts, due to the integrated DHCP server.
+:!: It is not possible to use a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]], due to the integrated DHCP server of the Axiom MFD.
 ===== 4. Configuration =====
 On the Victron GX Device, go to //Settings → Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.
@@ Line 56: / Line 58: @@
 {{youtube>dAfJy5d_vcA?large}}
+===== 7. NMEA 2000 =====
+The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
+In order to properly display the NMEA 2000 data from Victron equipment, you need to change the data instances of the PGNs that are sent out. See [[https://www.victronenergy.com/live/ve.can:changing_nmea2000_instances|here]] for more information about changing instances.\\
+To setup the data sources on the MFD, go to //Settings > Network > Sources > Advanced...//
+The following Victron related PGNs are supported:
+  * 127505 - Fluid level (tanks)
+  * 127506 - DC Detailed Status; State-of-charge, Time-to-go
+  * 127508 - Battery Status