Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2020-05-01 11:10] – [1. Introduction] mvader
+++ venus-os:mfd-raymarine [2020-06-11 17:30] – [4. Configuration] mbosma
@@ Line 30: / Line 30: @@
 To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use WiFi
 ===== 4. Configuration =====
-On the Victron GX Device, go to Settings → Services, and there enable both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
+On the Victron GX Device, go to //Settings → Services//, and there enable both //MQTT on LAN (SSL)// and //MQTT on LAN (Plaintext)//.
+{{:venus-os:venus-html5-mqtt.png?400|}}
-Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
+Next, go to //Settings → System Setup → Scroll to the bottom → Marine MFD App configuration//. And there set up what batteries you want to see on the MFD; and by what name.
+{{:venus-os:venus-html5-batteries1.png?400|}}
+{{:venus-os:venus-html5-batteries2.png?400|}}
 No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server.