Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2019-11-17 15:18] – [5. Configuring Multiple Battery Monitors] mvader
+++ venus-os:mfd-raymarine [2020-03-26 08:45] – [3. Wiring] mvader
@@ Line 3: / Line 3: @@
 ===== 1. Introduction =====
-The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]].
+The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]] by Raymarine.
 ===== 2. Compatibility =====
@@ Line 22: / Line 22: @@
   * A80513 - RayNet male to RJ45 adaptor cable
+Connecting a Axiom MFD to a network router lead ls to IP address conflicts, due to the integrated DHCP server.
+To connect the [[https://www.victronenergy.com/live/venus-os:start|GX device]] to the internet as well, use WiFi
 ===== 4. Configuration =====
-On the Victron GX Device, go to Settings → Services, and there enable MQTT.
+On the Victron GX Device, go to Settings → Services, and there enable both MQTT on LAN (SSL) and MQTT on LAN (Plaintext).
 Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
 No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server.
 ===== 5. Configuring Multiple Battery Measurements =====