Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-raymarine [2019-10-20 11:35] – [Raymarine MFD Integration] guystewart
+++ venus-os:mfd-raymarine [2019-11-13 11:19] – mbosma
@@ Line 3: / Line 3: @@
 This manual is still being actively developed.
-Raymarine MFDs may require a firmware update for compatibility.
+===== 1. Introduction =====
-Exact model support, and other technical details are still to come.
+The integration technology used is called [[http://www.raymarine.com/multifunction-displays/lighthouse3/lighthouse-apps.html|LightHouse Apps]].
-===== Step by Step =====
-{{:venus-os:ray_marine_gx_-_1.jpg?nolink&600|}}
+===== 2. Compatibility =====
-{{:venus-os:ray_marine_gx_-_2.jpg?nolink&600|}}
-{{:venus-os:ray_marine_gx_-_3.jpg?nolink&600|}}
-{{:venus-os:ray_marine_gx_-_4.jpg?nolink&600|}}
-{{:venus-os:ray_marine_gx_-_5.jpg?nolink&600|}}
-{{:venus-os:ray_marine_gx_-_6.jpg?nolink&600|}}
+The MFD integration is compatible with the Axiom, Axiom Pro and Axiom XL MFDs running on LightHouse 3. The eS & gS Series multifunction displays which have been upgraded to LightHouse 3 are **not** compatible.
-===== Step by Step Video =====
+Raymarine MFDs need at least LightHouse v3.11 for compatibility.
+===== 3. Wiring =====
+The MFD needs to be connected to the [[https://www.victronenergy.com/live/venus-os:start|GX device]] using ethernet. It is **not** possible to connect over Wi-Fi. For the ethernet connection, a RayNet adapter is required.
+The RayNet adapters can be purchased from Raymarine:
+  * A62360 - RayNet (F) to RJ45 (M) - 1m
+  * A80151 - RayNet (F) to RJ45 (M) - 3m
+  * A80159 - RayNet (F) to RJ45 (M) - 10m
+  * A80247 - RayNet (F) to RJ45 (F) Adapter
+  * A80513 - RayNet male to RJ45 adaptor cable
+===== 4. Configuration =====
+On the Victron GX Device, go to Settings → Services, and there enable MQTT.
+Next, go to Settings → System Setup → Scroll to the bottom → Battery measurements. And there set up what batteries you want to see on the MFD; and by what name.
+No other settings, such as IP addresses or similar are required, since the Axiom MFDs have an integrated DHCP server.
+===== 5. Configuring Multiple Battery Monitors =====
+{{youtube>0Mrk5Q4izvg?large}}
+===== 6. Step by Step =====
+{{:venus-os:ray_marine_gx_-_1.jpg?nolink|}}
+{{:venus-os:ray_marine_gx_-_2.jpg?nolink|}}
+{{:venus-os:ray_marine_gx_-_3.jpg?nolink|}}
+{{:venus-os:ray_marine_gx_-_4.jpg?nolink|}}
+{{:venus-os:ray_marine_gx_-_5.jpg?nolink|}}
+{{:venus-os:ray_marine_gx_-_6.jpg?nolink|}}
+{{youtube>dAfJy5d_vcA?large}}
-{{youtube>dAfJy5d_vcA}}