Differences

This shows you the differences between two versions of the page.

--- venus-os:mfd-navico [2020-06-11 17:26] – [4. Configuration] mbosma
+++ venus-os:mfd-navico [2020-06-25 10:52] – [4. Configuration] mbosma
@@ Line 45: / Line 45: @@
 No other settings, such as IP addresses or similar are required. The [[venus-os:start|GX device]] and the Navico devices connect to each other using a technology called linklocal addressing.
-It is possible to connect the a router to the same LAN; and that way connect the GX Device to the internet.
+It is possible to connect the a router to the same LAN; and that way connect the GX Device to the internet. The GX device can also be connected to the internet via Wi-Fi or with a [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]].
+Note that the [[https://www.victronenergy.com/accessories/gx-gsm|GX GSM]] can only be used if the MFD and [[venus-os:start|GX device]] are directly connected to each other, without a router.
 ===== 5. Configuring Multiple Battery Monitors =====
@@ Line 60: / Line 62: @@
 {{:venus-os:simrad-gx-6.jpg?nolink|}}
-===== 7. Troubleshooting =====
+===== 7. NMEA 2000 =====
+The MFD can also be connected to the GX device using NMEA 2000, see [[https://www.victronenergy.com/live/ccgx:start#marine_mfd_integration_by_nmea_2000|NMEA2000 chapter in the main manual]].
+The MFD can be configured easily to display the data from the GX device. There is no need to change any instance.\\
+To setup the data sources on the MFD, go to //Settings > Network > Sources > Advanced...//
+The following Victron related PGNs are supported:
+  * 127505 - Fluid level (tanks)
+  * 127506 - DC Detailed Status
+  * 127507 - Charger Status
+  * 127508 - Battery Status
+  * 127509 - Inverter Status
+  * J1939 AC PGNs
+===== 8. Troubleshooting =====
 Q1: The MFD page shows outdated information or shows the connection issue page, but the GX device is running and connected and the Victron icon is present on the home page.\\