Differences

This shows you the differences between two versions of the page.

--- venus-os:large [2021-01-29 15:43] – [4.3 Controlling relays] mvader
+++ venus-os:large [2021-02-09 19:53] – [4.4 Node-RED Dashboard] mvader
@@ Line 41: / Line 41: @@
 There is and will be **no official support** on the functionalities included in this image. For support, turn to the [[https://community.victronenergy.com/spaces/31/index.html|Modifications Space on Victron Community]].
+For support on SignalK, there is a #victron channel in [[http://slack-invite.signalk.org/|the SignalK Slack]] workspace.
 ===== 3. Requirements =====
@@ Line 166: / Line 167: @@
 It is viewable in a web browser - both locally as well as remote, via the VRM Servers. See chapter 6.2 for how to see it remotely.
-The dashboard needs to be installed, just like other extra palettes, using the Manage Palette feature.
+The dashboard needs to be installed, just like other extra palettes, using the Manage Palette feature, on the right of the screen in the menus.
+Once that is done, you can find the nods in the palettes on the left.
 Example dashboard:
@@ Line 202: / Line 205: @@
 For more information on Signal K, read [[http://signalk.org/overview.html|the Signal K website]]. And our blog post of a while ago.
-Note that Signal K is not a Victron project. At Victron, we a great fans of sailing, open source as well as community driven projects. And Signal K is a perfect example of such project. And when running on a GX Device its a perfect marriage.
+Note that Signal K is not a Victron project. At Victron, we are great fans of sailing, open source as well as community driven projects. And Signal K is a perfect example of such project. And when running on a GX Device its a perfect marriage.
 === 5.1.4 Signal K - the data format ===
@@ Line 243: / Line 246: @@
 And instead add information on what specifics we do in the Signal K install.
-  - Signalk-node version is 1.18.0
+  - Signalk-node version is 1.37.5
-  - Victron Venus Plugin, v1.10.0
+  - Victron Venus Plugin, v1.22.0
 ==== 5.4 First use & configuring ====
@@ Line 258: / Line 261: @@
 Use this to, for example, configure a USB-connected NMEA0183 connection in SignalK. To do so, go to the dashboard (http://0.0.0.0:3000), and there to Server -> Connections.
-Make sure to not add a connecting using any of the built-in serial ports (/dev/ttyO0, /dev/ttyO2, /dev/ttyO4, /dev/ttyO5). These are the VE.Bus- and VE.Direct ports on the Venus GX, and it is not necessary to configure them in SignalK. Data from any devices there connected is already available in SignalK, by means of the "Victron Venus Plugin"; see Dashboard -> Server -> Plugin Config.
+Make sure to not add a connection using any of the built-in serial ports (/dev/ttyO0, /dev/ttyO2, /dev/ttyO4, /dev/ttyO5). These are the VE.Bus- and VE.Direct ports on the Venus GX, and it is not necessary to configure them in SignalK. Data from any devices there connected is already available in SignalK, by means of the "Victron Venus Plugin"; see Dashboard -> Server -> Plugin Config.
 Note that once configured in SignalK, for example a USB-serial port, that port is no longer normally available in Venus OS. For example, when plugging in a USB-GPS; and then adding a connection for its corresponding tty in the SignalK, makes for that GPS to be no longer be recognised and available in Venus OS.