Differences

This shows you the differences between two versions of the page.

--- venus-gx:start [2019-12-11 10:58] – [3.2 Small button located to the right of the green 14-Terminal Connector Block] mvader
+++ venus-gx:start [2019-12-16 16:04] – [5. How does the Venus GX compare with the CCGX?] mvader
@@ Line 103: / Line 103: @@
   * Fast blinking: built-in WiFi access point enabled (default)
+Slow blinking is once per second. Fast blinking is twice per second.
 ==== 3.2 Small button located to the right of the green 14-Terminal Connector Block ====
@@ Line 111: / Line 112: @@
 === Long press: reset all network settings to factory defaults ===
-Press and hold the small button until the LED does XYZ.
+Press and hold the small button for a minimum of four seconds. The LED will stay on for 2 seconds to indicate that the log press has been recognised; then release the button again.
   * Ethernet is set back to DHCP
@@ Line 118: / Line 119: @@
   * Remote Console on LAN and on VRM is enabled
-Slow blinking = xx per second. Fast blinking is xx per 5 seconds.
+The same button is available on the Octo GX, button is marked SD_BOOT and available under the lid at the top.
 ===== 4. Digital Inputs =====
@@ Line 179: / Line 180: @@
 ===== 5. How does the Venus GX compare with the CCGX?=====
-See [[:venus-os:start#products_running_venus_os]]
+See [[:venus-os:start]].
 ===== 6. Factory reset =====