Differences

This shows you the differences between two versions of the page.

--- venus-gx:start [2019-06-03 15:16] – [6. Factory reset] mvader
+++ venus-gx:start [2019-07-03 03:47] – [2.2 Accessing 'Remote Console' via the built-in WiFi Access Point] guy_stewart
@@ Line 48: / Line 48: @@
   - After searching, it will show up in the list:
   - Connect to WiFi using the 'WiFi key' which you will find printed on the side of the box ...and also on a card in the plastic bag - which you should keep in a safe place.
-  - Once connected, navigate to 172.24.24.1
+  - Open VictronConnect, and select the GX device from the Device list
+  - Select Remote Console
+  - If you cannot use VictronConnect, you can use a web browser and navigate to the IP address  172.24.24.1
 Note that for added security it is possible to disable the WiFi Access Point. See Settings -> Wi-Fi -> Create access point.
 **Caution**: Once WiFi Access is disabled the only way to get it back is by using 'Remote Console' on VRM -which requires a working internet connection; or via 'Remote Console' on LAN which requires a working network connection (but no internet).
 ==== 2.3 Finding the IP address ====
@@ Line 185: / Line 186: @@
 === Improvement coming ===
-This functionality is due for an improvement. In the mean time, in case all above doesn't work and you are locked-out, contact your dealer for a replacement.
+This functionality is due for an improvement, a real Factory reset is coming. In the mean time, in case all above doesn't work and you are locked-out, contact your dealer for a replacement.
 ===== 7. More information =====