User Tools

Site Tools


vedirect_lorawan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
vedirect_lorawan [2020-05-28 08:31]
mvader
vedirect_lorawan [2020-07-14 17:42] (current)
bob [What's in the box?]
Line 76: Line 76:
   - Mount the LoRaWAN Module close to the device you wish to monitor   - Mount the LoRaWAN Module close to the device you wish to monitor
   - Connect the VE.Direct cable between devices   - Connect the VE.Direct cable between devices
-  - Connect the DC Power (8V - 68V)+  - Connect the DC Power (8V - 68V, looking to the module with green connector below of the module, the positive is on the left)
   - After a short wait the LED will blink green indicating that all is OK   - After a short wait the LED will blink green indicating that all is OK
   - Go to the VRM Portal to add your installation   - Go to the VRM Portal to add your installation
vedirect_lorawan.txt · Last modified: 2020-07-14 17:42 by bob