Differences

This shows you the differences between two versions of the page.

--- ve.can:ve.can_resistive_tank_sender_adapter [2016-06-01 09:37] – [1. Introduction] mvader
+++ ve.can:ve.can_resistive_tank_sender_adapter [2022-01-27 09:34] (current) – [Volume unit] mvader
@@ Line 87: / Line 87: @@
 {{:ve.can:tanksensor_unit.png?direct&480|}}
-===== DISQUS =====
-~~DISQUS~~
+===== Frequently asked questions =====
+=== Q1: Can I configure a custom name? ===
+No. The VE.Can Tank Sender Adapter does not accept configuring a custom name. The method available to distinguish from one tank to another are the instances.
+This is unlike the GX Tank 140 and as well as inputs available directly on the Cerbo GX: there it is possible to configure a name.
+=== Q2: Why is this tank sender adapter so expensive? ===
+That is because its expensive to produce. For lower cost options, consider a GX Device with direct tank inputs, such as the Cerbo GX. And to extend those, consider our GX Tank 140. Note that the GX Tank 140 takes 0-10V and 4-20mA senders, not resistive.