ers:
* Add firmware v1.68
* Remove battery temperature compensation from load output voltage thresholds
... ixed alarm relay that was not activating for high temperature alarms
Smart & Blue Smart Chargers
* Add firm... to be more precise
* Better description of the "Temperature compensation" parameter
* Add data selection fo... missing high DC ripple voltage / high DC terminal temperature alarm and warning
* Add support for new models
or example, do not show humidity and pressure for sensors that collect only temperature.
=== 2022-03-09===
* Add dark mode.
* Add "P... nsor.
* Dashboard: Improve naming for tanks and temperaturesensors by using custom name, temperature/tank type, and instance numbers.
* Dashboard: Make font sizes and weights ... future auditing
* Fix synchronized tooltip for temperature and state widgets
=== 2021-08-23 ===
* Add lang
rmal Cerbo GX but without BMS-Can port, Tank- and Temperature monitoring inputs.
* [[https://www.victronenerg... .
* [[https://www.victronenergy.com/accessories/temperature-sensor-qua-pmp-venus-gx|Temperature sensor for Quattro, MultiPlus and GX Device]] - Temperature sensor accessory for the temperature inputs of the
====== TemperatureSensors ======
Victron products can make use of temperature sense information to improve accuracy o... ]] | [[https://www.victronenergy.com/meters-and-sensors/temperature-sensor-qua-pmp-venus-gx|Link]] | [[https://www.victronenergy.com/accessories/temperature-sensor-for-bmv-702|Link]] | [[https://www.victronenergy.com/meters-and-sensors/temperature-sensor-type-c|Link]] |
| Manual | [[https://www.victronenergy.com/live/vebus_smart_dongle_manu
roduct)
===== Introduction =====
The Wireless AC sensors are used to measure and calculate PV Inverter cur... device via Ethernet, and is the DECT hub for the sensors. Multiple sensors connect to 1 gateway.
Note that it is not possible to use multiple sensors on the same position (AC-Out, AC-In 1, etcetera)
Generators | 3200 to 3223 |
| com.victronenergy.temperature | Temperaturesensors <sup>(1)</sup> | 3300 to 3305 |
| com.victronener... rs | 3600 to 3603 |
(1): These are the auxiliary temperaturesensors built-in to our GX devices, such as the Venus GX.... f that device's data, not under com.victronenergy.temperature.
==== 3. Supported Modbus-TCP function codes ===
Sense tile layout for configured and unconfigured sensors.
* Switches: Change the style of the switches... ormly.
* Dashboard: users can now choose which temperature sensor or tank is displayed in the VC embedded da... d PM2.5 are now shown more prominently within the temperature card.
* Installation: unlink action is now dis... ing for Meterological sensor.
* Dashboard: Use Temperature sensor type for the name of the card if no custom
provide live positional data.
* **Virtual tank/temperature sensor** – integrate LoRa, MQTT, or custom sensors.
=== Supported Virtual Devices ===
Currently su... ts)
* **PV inverter**
* **Tank sensor**
* **Temperature sensor**
As separate Virtual Switch node is prov... * NMEA0183 and NMEA2000 GPS data, AIS data, Wind Temperature and other environmental data, tbd
* Engine data
arge battery bank it is possible to wire multiple temperaturesensors. The system will use the one with the highest temperature to determine the temperature compensation.
* Wire the voltage sense on the master of L1.\\ (If the system ha
ensor can be wired to either the AUX input or the Temperature-input of Multi and Quattro inverter/chargers.
Th... | all off | 1 | 1,2 | 1,2,3 | |
|Max # of sensors in one system | 9 |||||
|Protection category
