Differences

This shows you the differences between two versions of the page.

--- open_source:start [2020-05-20 14:10] – [1. Venus OS: the software on our GX product range and also for the Raspberry Pi] marmour
+++ open_source:start [2022-06-14 18:35] – mano8
@@ Line 77: / Line 77: @@
   * https://github.com/physee/Victron.Arduino-ESP8266
   * [[https://community.victronenergy.com/questions/21377/basic-lightweight-vedirect-reading-library-for-ard.html|VE.Direct reading library for Arduino]]
+  * [[https://github.com/cterwilliger/VeDirectFrameHandler | Arduino VE.Direct library based on Victron's reference implementation]]
+  * [[https://github.com/giacinti/VeDirectFrameHandler | Arduino & ESP32 VE.Direct library supporting HEX protocol (fork of previous project, see below for ESPHOME sensor)]]
+Battery/BMS:
+  * [[https://github.com/Louisvdw/dbus-serialbattery|Serial battery driver for GX devices]] supporting multiple BMS/Battery types.
 Other:
@@ Line 89: / Line 94: @@
   * https://pypi.python.org/pypi/BMV/0.2.1
   * https://github.com/karioja/vedirect
+  * https://github.com/mano8/vedirect_m8
   * https://github.com/jepefe/bmvmonitor
   * Nodejs monitor Raspberry PI https://github.com/Moki38/vedirect
@@ Line 99: / Line 105: @@
   * Victron Blog about the victronPi above: [[https://www.victronenergy.com/blog/2018/04/11/homemade-pi-open-source-raspberry-flavour/]]
   * velog: Serial log application for VE.Direct devices [[https://github.com/ullman/velog]]
+  * [[https://github.com/giacinti/vedirect | ESPHOME VE.Direct sensor]]
 ===== FAQ =====