Differences

This shows you the differences between two versions of the page.

--- hv_battery_compatibility:pylontech [2026-06-12 14:33] – created guy_stewart
+++ hv_battery_compatibility:pylontech [2026-06-17 09:59] (current) – guy_stewart
@@ Line 12: / Line 12: @@
   * Modules per stack: **7 only** (the product allows 2 - 7; 6 or fewer sits below the HS19 range)
-  * Usable voltage range: **650 - 818 V**. The battery's own discharge floor is approx. 605 V (estimated at 2.7 V/cell), below the HS19 minimum, so the bottom of the SOC range is unusable.
+  * Usable voltage range: **650 - 818 V**. The battery's own discharge floor is approx. 605 V (estimated at 2.7 V/cell), below the HS19 minimum, so the bottom of the SOC range is not available.
   * Capacity: **36 kWh** per stack
@@ Line 23: / Line 23: @@
   * Test status: will be tested soon
-  * FDCan support: only up to 500 kbit/s (status 04-2024, update requested)
-===== Powercube H2 (deprecated) =====
-==== Not for use with the HS19 ====
-Maximum stack voltage is 648 V at 12 modules, below the HS19 minimum of 650 V. No valid configuration exists. Not compatible with current HS19 hardware.