hv_battery_compatibility:lbsa
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| — | hv_battery_compatibility:lbsa [2026-06-12 14:39] (current) – created guy_stewart | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== LBSA HV (Rhino IntelliFlex HV) ====== | ||
| + | |||
| + | ===== Manufacturer links ===== | ||
| + | |||
| + | * HV range page: [[https:// | ||
| + | * Module spec page: [[https:// | ||
| + | * User manual (web): [[https:// | ||
| + | |||
| + | ===== Use with the HS19 (650 - 1000 V DC) ===== | ||
| + | |||
| + | * Modules per rack: **10 - 11** (the product allows 3 - 11; 9 or fewer sits below the HS19 range) | ||
| + | * Usable voltage range: **660 - 927 V** | ||
| + | * Capacity: **80 - 88 kWh** per rack | ||
| + | |||
| + | |||
| + | ===== Full product specifications (unverified, | ||
| + | |||
| + | * Module: 76.8 V nominal (24S LiFePO4), 104 Ah / 7.98 kWh | ||
| + | * 100 A continuous per rack (200 A for 60 s); up to 60 racks parallel | ||
| + | |||
| + | ===== Compatibility status ===== | ||
| + | |||
| + | * Test status: tested, now offline | ||
| + | * FDCan support: unknown | ||
| + | |||
| + | ===== Setup guide ===== | ||
| + | |||
| + | FIXME Setup instructions to be written. | ||
hv_battery_compatibility/lbsa.txt · Last modified: by guy_stewart