Differences

This shows you the differences between two versions of the page.

--- eco_multi:start [2015-02-24 13:18] – Page moved and renamed from drafts:eco_multi_installation to eco_multi:start mvader
+++ eco_multi:start [2019-01-22 10:16] (current) – external edit 127.0.0.1
@@ Line 49: / Line 49: @@
 The components are cabled in this way:
-{{:drafts:ecomulti-0000.png?nolink&900  }}
+{{:drafts:ecomulti-0000.png?nolink&900}}
 In the following sections the installation of this system is documented.
@@ Line 141: / Line 141: @@
   * RJ12 UTP Cable 3 m (or even longer)
-Download the required Victron software from Victron [[http://www.victronenergy.com/support-and-downloads/software/|http://www.victronenergy.com/support-and-downloads/software/]]:
+Download the required Victron software from Victron [[https://www.victronenergy.com/support-and-downloads/software|https://www.victronenergy.com/support-and-downloads/software]]:
   * VE Configuration tools for VE.Bus Products
@@ Line 413: / Line 413: @@
 ===== Configure CCGX =====
-The CCGX (Firmware 1.14) must be configured now:
+The CCGX (Firmware 1.14) must now be configured. Note that later and more up to date firmware versions behave in much the same manner. Adopt the same principals as below:
   * Remove the MK2USB programming cable (grey) from the VE.Bus input, if not done already
@@ Line 489: / Line 489: @@
 {{:drafts:ecomulti0099.png?nolink&650x436}}
-===== DISQUS Comments =====
+===== DISQUS =====
 ~~DISQUS~~