User Tools

Site Tools


drafts:dynamic_ess

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
drafts:dynamic_ess [2025-12-17 17:49] aleximbdrafts:dynamic_ess [2026-09-04 18:35] (current) – [Step 1: System] dfaber
Line 34: Line 34:
 ==== Step 1: System ==== ==== Step 1: System ====
  
-First, confirm whether you can sell excess electricity back to the grid. If so, you'll be asked to provide details on the power limits for selling. The limit will be the lower value between your grid connection capacity and what your system can handle. For example, if your grid connection supports 17 kWh but your system can only handle 10 kWh, enter 10 kWh.+First, confirm whether you can sell excess electricity back to the grid. If so, you'll be asked to provide 
 +details on the power limits for selling. The limit will be the lower value between your grid connection 
 +capacity and what your system can handle. For example, if your grid connection supports 17 kW but your 
 +system can only handle 10 kW, enter 10 kW.
  
-Note: This step defines the systems potential capabilities, not the actual operational limits you'll set later.+Note: This step defines the system's potential capabilities, not the actual operational limits you'll set 
 +later. 
 + 
 +**Operating mode:** choose Green mode or Trade mode — the two modes are described above. You can 
 +always switch between them later. 
 + 
 +{{:drafts:step_1_config.png?nolink&400|}} 
 + 
 +**New: Disable solar at low buy prices** 
 + 
 +Energy prices sometimes drop very low; they can even go negative. At those moments your own solar 
 +power can actually cost you money: exporting the surplus is charged instead of paid, and buying from 
 +the grid is cheaper than using your own production. Dynamic ESS can now handle this for you. Open 
 +Advanced Settings and switch on Disable solar at low buy prices, then set your threshold. Whenever the 
 +buy price drops below it, solar production is paused automatically, and it resumes as soon as the price 
 +recovers. No need to keep an eye on the prices yourself. 
 + 
 +Note: Disabling solar production works with these systems: HS19, Multi RS, MultiPlus, MPPTs, PV inverters that support the SunSpec protocol and limiting. 
 + 
 +{{ :drafts:dess-disable-solar-at-low-buy-price.png?nolink&400 |}}
  
-{{:drafts:step_1_config.png?400|}} 
  
 ==== Step 2: Battery information ==== ==== Step 2: Battery information ====
drafts/dynamic_ess.txt · Last modified: by dfaber

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki