ccgx:root_access
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| ccgx:root_access [2024-06-15 16:23] – [4.4 Adding or modifying services] mvader | ccgx:root_access [2025-06-14 21:00] (current) – [3.5 Play time! Start executing commands] mvader | ||
|---|---|---|---|
| Line 33: | Line 33: | ||
| ==== 3.1 Set access level to Superuser ==== | ==== 3.1 Set access level to Superuser ==== | ||
| - | To set the root password, first set the access level to Superuser: | + | To set the root password, first set the access level to Superuser. |
| - Go to Settings, General | - Go to Settings, General | ||
| - Set the Access Level to User and installer, the password is '' | - Set the Access Level to User and installer, the password is '' | ||
| - Highlight Access Level (don't open the select page, ie. make sure you are in the General Page, not the Access Level page) | - Highlight Access Level (don't open the select page, ie. make sure you are in the General Page, not the Access Level page) | ||
| - | - Press and hold the right button of the center pad until you see the Access Level change to Superuser. Note: when working from the Remote Console, you need to use the right key on your keyboard. Pressing and holding the right button with your mouse won't work. | + | - Press and hold the right button of the center pad until you see the Access Level change to Superuser. Note: when working from the Remote Console |
| Now you have access to the super user features. | Now you have access to the super user features. | ||
| Line 78: | Line 79: | ||
| ==== 3.5 Play time! Start executing commands ==== | ==== 3.5 Play time! Start executing commands ==== | ||
| - | https://www.victronenergy.com/live/open_source: | + | [[https://github.com/victronenergy/venus/ |
| ===== 4. Customizing a GX device ===== | ===== 4. Customizing a GX device ===== | ||
| Line 314: | Line 315: | ||
| The serial console is located on the base-board, and can be accessed through the slot between that board and the Ethernet connector on the beaglebone-board. | The serial console is located on the base-board, and can be accessed through the slot between that board and the Ethernet connector on the beaglebone-board. | ||
| - | White: TX of the Beaglebone - connect to RX on your cable | + | * White: TX of the Beaglebone - connect to RX on your cable |
| - | Black: ground | + | |
| - | Green: RX of the Beaglebone - connect to TX on your cable | + | |
| Make sure not to connect the red wire. | Make sure not to connect the red wire. | ||
ccgx/root_access.1718461385.txt.gz · Last modified: by mvader