User Tools

Site Tools


ccgx:fischer_panda

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ccgx:fischer_panda [2019-07-11 08:50]
mvader [Menu]
ccgx:fischer_panda [2020-02-04 13:47] (current)
mvader
Line 1: Line 1:
-====== ​CCGX & Fischer Panda generators ======+====== ​GX - Fischer Panda generators ====== 
 + 
 +Fischer Panda generator can be connected to a GX Device, which makes it possible to monitor & operate the generator as well as automatically start and stop it. 
 + 
 +The generator needs to be connected to the VE.Can port of the GX Device, which requires a Fischer Panda SAE J1939 module.
  
-Beginning with the release of [[https://​www.victronenergy.com/​blog/​2017/​06/​13/​ccgx-v2-07-fischer-panda-ess-and-more/​|CCGX v2.07]] it became possible to read data from your Fischer Panda generator. The generator needs to be connected to the VE.Can port of the CCGX, which requires a Fischer Panda SAE J1939 module. 
 ===== Requirements ===== ===== Requirements =====
-  * CCGX or Venus GX+  * [[venus-os:​start|GX Device]], with firmware v2.07 or later
   * Fischer Panda generator, xControl or iGenerator   * Fischer Panda generator, xControl or iGenerator
   * Fischer Panda SAE J1939 CAN module (part number 0006107)   * Fischer Panda SAE J1939 CAN module (part number 0006107)
Line 45: Line 48:
 {{:​ccgx:​fischerpanda-enginemenu.png?​400|}} {{:​ccgx:​fischerpanda-enginemenu.png?​400|}}
 ===== Generator start/stop ===== ===== Generator start/stop =====
-In addition to the manual start/stop and monitoring, there is also an automatic start/stop feature. This has the same comprehensive range of options as the Generator start/stop feature associated with the CCGX relay.+In addition to the manual start/stop and monitoring, there is also an automatic start/stop feature. This has the same comprehensive range of options as the Generator start/stop feature associated with the GX relay.
 See [[ccgx:​generator_start_stop]] for the manual. See [[ccgx:​generator_start_stop]] for the manual.
  
Line 58: Line 61:
  
 === I've set the mode of the genset to '​On'​ or 'Auto start/​stop'​ but the generator is not starting/​running. === === I've set the mode of the genset to '​On'​ or 'Auto start/​stop'​ but the generator is not starting/​running. ===
-Make sure the Fischer Panda autostart feature is on, this allows the CCGX control the remote on/off of the genset. You can find this option on the control panel in the menu ''​generator -> autostart -> turn on / off''​.+Make sure the Fischer Panda autostart feature is on, this allows the GX control the remote on/off of the genset. You can find this option on the control panel in the menu ''​generator -> autostart -> turn on / off''​.
  
 If you're manually trying to start the genset, a toast message appears with the text ''​AutoStart functionality is currently disabled, enable it on the genset panel in order to start the genset from this menu''​. If you're manually trying to start the genset, a toast message appears with the text ''​AutoStart functionality is currently disabled, enable it on the genset panel in order to start the genset from this menu''​.
Line 67: Line 70:
  
  
-===== DISQUS ===== +
-~~DISQUS~~+
  
ccgx/fischer_panda.txt · Last modified: 2020-02-04 13:47 by mvader