Differences

This shows you the differences between two versions of the page.

--- ccgx:firmware_upgrade_to_v2 [2020-06-30 23:33] – [CCGX: Upgrading to v2] mvader
+++ ccgx:firmware_upgrade_to_v2 [2020-10-09 02:04] – [Upgrade procedure] guy_stewart
@@ Line 6: / Line 6: @@
 This document explains how to do the manual upgrade.
-Once upgraded, updates can be installed automatically from the internet again. See [[https://www.victronenergy.com/live/ccgx:firmware_updating|here]] for how to that (after performing this one time manual update).
+Once upgraded, updates can be installed normally again. Procedure for normal firmware updates is in [[https://www.victronenergy.com/media/pg/2556-GX_Device_Manual_CCGX/en/updating-gx-firmware.html|the Color Control GX Manual]].
 ===== Upgrade procedure =====
@@ Line 33: / Line 33: @@
   - So, remove the card, and press buttons A and B again to reboot.
-Upgrade complete already! But make sure to double check a few things:
+Upgrade from 1.x to 2.11 is now complete! But make sure to double check a few things:
   * All settings in the connected devices (Multis, BMV, Solar Charger etcetera) won’t be affected.
   * Also all settings in the ccgx won’t be affected. But still it is good to double check that.
   * Especially double check wifi and/or ethernet passwords and IP configuration.
+  * There are additional versions of VenusOS that have been released since this update image. To finish updating to the latest version, you can now follow the normal [[ccgx:firmware_updating|version 2.x firmware update instructions here. ]]
 ===== Troubleshooting =====
@@ Line 67: / Line 68: @@
   - the sdcard slot in the CCGX is broken: contact your dealer for a replacement;
   - A device, mostly a BMV or MPPT, is connected to VE.Direct port 1. Try disconnecting that, and retry. Did that help? Please let us know by posting what happened here below in Disqus.
-===== DISQUS =====
-~~DISQUS~~