User Tools

Site Tools


ccgx:ccgx_fronius

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
ccgx:ccgx_fronius [2019-06-27 15:35] iburgerccgx:ccgx_fronius [2019-09-18 07:52] – [2.2 Adding Fronius to the CCGX] mvader
Line 80: Line 80:
 4. Configure the //position// relative to the Multi or Quattro (is it: AC Input / AC Output); and the //phase// for each inverter in the list: \\ {{:ccgx:ccgx-fronius-position.png?nolink|}} \\ \\ 4. Configure the //position// relative to the Multi or Quattro (is it: AC Input / AC Output); and the //phase// for each inverter in the list: \\ {{:ccgx:ccgx-fronius-position.png?nolink|}} \\ \\
     * Position: = the position relative to the Multi or Quattro [AC Input 1 / AC Input 2 / AC Output]     * Position: = the position relative to the Multi or Quattro [AC Input 1 / AC Input 2 / AC Output]
-    * Phase: = the phase on which the PV Inverter installed. Disabled and set to Multi-phase for split- and three-phase PV Inverters  +    * Phase: = the phase on which the PV Inverter installed. This setting is automatically set to Multi-phase for split- and three-phase PV Inverters  
     * Show: = show this device in the system or not. Use this feature when there are multiple, separate, energy systems on the same LAN.     * Show: = show this device in the system or not. Use this feature when there are multiple, separate, energy systems on the same LAN.
  
ccgx/ccgx_fronius.txt · Last modified: 2020-03-19 15:30 by guy_stewart

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki