Differences

This shows you the differences between two versions of the page.

--- ccgx:abb_fimer [2021-02-27 17:17] – ↷ Page name changed from ccgx:abb to ccgx:abb_fimer rgerber
+++ ccgx:abb_fimer [2021-06-16 15:30] (current) – [1. Introduction] rgerber
@@ Line 8: / Line 8: @@
   - Allow the Victron system to control the output power, Zero feed-in. This uses the same mechanism used for Fronius PV inverters. See the [[ess:design-installation-manual|ESS manual]], chapter 2.1.3 Fronius Zero feed-in for details.
   - Frequency shift power control, as explained in [[ac_coupling:start|AC-Coupling system]] also works.
+{{:ccgx:victron_abb-fimer_ac_couple_layout.png?nolink&600|}}
 ===== 2. Supported models =====
@@ Line 21: / Line 21: @@
 ===== 3. Configuration =====
-Please consult the manual that came with your ABB/FIMER PV inverter. This explains how to connect your ABB inverter to the network using either an Ethernet or a WiFi connection.
+Please consult the manual that came with your ABB/FIMER PV inverter. This explains how to connect your ABB/FIMER inverter to the network using either an Ethernet or a WiFi connection.
 You can also use the "INSTALLER FOR SOLAR INVERTERS" app. Available on Apple and Android.