Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:solar_md [2019-07-27 16:36] – [Victron & SOLARMD Battery] kaloyan
+++ battery_compatibility:solar_md [2019-07-28 09:35] – [Victron & SOLARMD Battery] kaloyan
@@ Line 3: / Line 3: @@
 The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD.
-The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.
+The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules. To find out how to install the Logger V2 watch this [[https://www.youtube.com/watch?v=9T-sshGcJ3w&t=2s|YouTube installation video]].
@@ Line 9: / Line 9: @@
 ^ Model ^ SS4037^ SS4074^ SS202^
-| Battery | {{ :battery_compatibility:solar_md_3.7kwh.jpg?direct&200% |}} | {{ :battery_compatibility:img_6542.jpg?direct&200% |}} | {{ :battery_compatibility:img_9807sqlogobox.jpg?direct&200% |}} |
+| Battery | {{ :battery_compatibility:solar_md_3.7kwh.jpg?direct&200% |}} | {{ :battery_compatibility:img_6542.jpg?direct&200% |}} | {{:battery_compatibility:img_9807sqlogobox.jpg.jpg?direct&200% |}} |
 |ESS	|	yes|	yes|	yes|
 |Grid Backup |	yes|	yes|	yes|
@@ Line 18: / Line 18: @@
 |Logger V2 |	yes|	yes|	yes|
-== Typical System overview ==
+For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
+----
+__//== System overview ==//__
 {{:battery_compatibility:solarmd-victron_wiring.jpg?direct |}}
+----
+__//== Typical installation with a Single SS4074 and Multiplus II 48/3000 ==//__
+{{ :battery_compatibility:typical_solar_md_victron_installation.png?direct |}}
+----
+__//== Typical installation with Multiple SS202 modules, 3 Quattros, 3 MPPTs, and Fronius integration ==//__
+{{ :battery_compatibility:unilec_installation_minigrid.jpeg?direct |}}
+----
-For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
 ===== 1. Product & System compatibility =====
@@ Line 68: / Line 86: @@
 For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
+----
 Solar MD also releases a firmware update for the LOGGER V2 and BMS. LOGGER V2 Firmware versions earlier than V6-13 are not compatible with Victron equipment and can cause the battery to not be detected. All software updates of Solar MD equipment are done remotely and automatically as soon as the Logger V2 has an internet connection.
@@ Line 123: / Line 144: @@
 Use any UTP cable. Plug 3 of the wires (PIN 7, PIN 8, PIN 3) into the SolarMD LoggerV2. Plug the other side with RJ45 connector into the [[venus-os:start|Venus-device]].
-{{ :battery_compatibility:canbus_solarmd.png |}}
+{{:battery_compatibility:canbus_solarmd.png?direct |}}
-Then, plug a[[https://www.victronenergy.com/accessories/ve-can-rj45-terminator|VE.Can terminator]] in the other VE.Can socket on the [[venus-os:start|Venus-device]] alternatively, you can use the termination on the Logger V2 side. Two VE.Can terminators are included with the package of the [[venus-os:start|Venus-device]] as an accessory, only one is used. Keep the other one as a spare.
+Then, plug a [[https://www.victronenergy.com/accessories/ve-can-rj45-terminator|VE.Can terminator]] in the other VE.Can socket on the [[venus-os:start|Venus-device]] alternatively, you can use the termination on the Logger V2 side. Two VE.Can terminators are included with the package of the [[venus-os:start|Venus-device]] as an accessory, only one is used. Keep the other one as a spare.
 More information about the cable can be found in its manual.
@@ Line 169: / Line 190: @@
+----
@@ Line 197: / Line 220: @@
 If you have a VE.Can MPPT, it is advised to use the Venus GX in place of the CCGX.
+----
   * Select the CAN-bus BMS (500 kbit/s) CAN-profile in the CCGX.
@@ Line 203: / Line 229: @@
 Settings → Services → CAN-profile.
-  * On the Solar MD portal (login.mypower24.co.za) Select Victron CAN Translator on CAN2:
+{{:battery_compatibility:2019-07-27_17_05_49-_-_vrm_portal_-_can_speed.png?direct |}}
+----
+  * On the Solar MD portal ([[http://login.mypower24.co.za]]) Select Victron CAN Translator on CAN2:
 Menu path:
-My Devices → Logger → Interfaces →CANBUS2
+My Devices → Logger → Interfaces → CANBUS2 . After choosing Victron CAN Translator, proceed with Software reboot on the Logger V2 in the Tab  "System Settings"
+{{:battery_compatibility:solar_md_portal.png?direct |}}
+----
   * After properly wiring and setting up, the Battery will be visible as a battery in the device list:
+{{:battery_compatibility:venus_solarmd.png?direct |}}
 (if you have multiple batteries a single entry will show up, which represents all batteries).
+----
   * The parameters option within the battery page shows the actual battery charge and discharge limits