Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:solar_md [2019-07-27 14:20] – [Victron & SOLARMD Battery] kaloyan
+++ battery_compatibility:solar_md [2019-07-27 17:38] – [Victron & SOLARMD Battery] kaloyan
@@ Line 3: / Line 3: @@
 The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD.
-The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a Battery Management Unit (LOGGER V2) that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.
+The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.
-== OVERVIEW ==
+== Supported models ==
-{{ :battery_compatibility:solarmd-victron_wiring.jpg?direct |}}
+^ Model ^ SS4037^ SS4074^ SS202^
+| Battery | {{ :battery_compatibility:solar_md_3.7kwh.jpg?direct&200% |}} | {{ :battery_compatibility:img_6542.jpg?direct&200% |}} | {{:battery_compatibility:img_9807sqlogobox.jpg.jpg?direct&200% |}} |
-^ Battery ^	SS4037 ^ SS4074	^ SS202 ^	SS237-25.6V ^
+|ESS	|	yes|	yes|	yes|
-| ESS	|	yes |	yes |	yes |	yes |
+|Grid Backup |	yes|	yes|	yes|
-| Grid Backup |	yes |	yes |	yes |	yes |
+|Off-Grid |	yes|	yes|	yes|
-| Off-Grid |	yes |	yes |	yes |	yes |
+|Module capacity |	3.7kWh|	7,4kWh|	7,4kWh|
-| Module capacity |	3.7 kWh |	7.4 kWh	|7.4 kWh |	3.7kWh |
+|Module limit |	256|	256|	256|
-| Module limit |	256 |	256 |	256 |	256 |
+|Max capacity |	947 kWh|	1894,4 kWh|	1894,4 kWh|
-| Max capacity |	947 kWh |	1894,4 kWh |	1894,4 kWh |	947 kWh |
+|Logger V2 |	yes|	yes|	yes|
 For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
+----
+== System overview ==
+{{:battery_compatibility:solarmd-victron_wiring.jpg?direct |}}
+----
+== Typical installation with a Single SS4074 and Multiplus II 48/3000 ==
+{{ :battery_compatibility:typical_solar_md_victron_installation.png?direct |}}
+----
+== Typical installation with Multiple SS202 modules, 3 Quattros, 3 MPPTs, and Fronius integration ==
+{{ :battery_compatibility:unilec_installation_minigrid.jpeg?direct |}}
+----
 ===== 1. Product & System compatibility =====
@@ Line 113: / Line 139: @@
 ===== 3. CAN Bus Wiring =====
-Use any UTP cable. Plug 3 of the wires into the SOLARMD BMS. Plug the other side with RJ45 connector into the [[venus-os:start|Venus-device]].
+Use any UTP cable. Plug 3 of the wires (PIN 7, PIN 8, PIN 3) into the SolarMD LoggerV2. Plug the other side with RJ45 connector into the [[venus-os:start|Venus-device]].
-{{ :battery_compatibility:canbus_solarmd.png |}}
+{{:battery_compatibility:canbus_solarmd.png?direct |}}
-Then, plug a[[https://www.victronenergy.com/accessories/ve-can-rj45-terminator|VE.Can terminator]] in the other VE.Can socket on the [[venus-os:start|Venus-device]] alternatively, you can use the termination on the Logger V2 side. Two VE.Can terminators are included with the package of the [[venus-os:start|Venus-device]] as an accessory, only one is used. Keep the other one as a spare.
+Then, plug a [[https://www.victronenergy.com/accessories/ve-can-rj45-terminator|VE.Can terminator]] in the other VE.Can socket on the [[venus-os:start|Venus-device]] alternatively, you can use the termination on the Logger V2 side. Two VE.Can terminators are included with the package of the [[venus-os:start|Venus-device]] as an accessory, only one is used. Keep the other one as a spare.
 More information about the cable can be found in its manual.
@@ Line 195: / Line 221: @@
 Settings → Services → CAN-profile.
-  * On the Solar MD portal (login.mypower24.co.za) Select Victron CAN Translator on CAN2:
+{{ :battery_compatibility:2019-07-27_17_05_49-_-_vrm_portal_-_can_speed.png?direct |}}
+  * On the Solar MD portal ([[login.mypower24.co.za]]) Select Victron CAN Translator on CAN2:
 Menu path:
-My Devices → Logger → Interfaces →CANBUS2
+My Devices → Logger → Interfaces → CANBUS2
+{{ :battery_compatibility:solar_md_portal.png?direct |}}
   * After properly wiring and setting up, the Battery will be visible as a battery in the device list:
+{{ :battery_compatibility:venus_solarmd.png?direct |}}
 (if you have multiple batteries a single entry will show up, which represents all batteries).