Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:solar_md [2019-07-27 12:52] – [5. Venus-device and LoggerV2 Configuration] kaloyan
+++ battery_compatibility:solar_md [2019-07-27 16:36] – [Victron & SOLARMD Battery] kaloyan
@@ Line 3: / Line 3: @@
 The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD.
-The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a Battery Management Unit (LOGGER V2) that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.
+The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.
+== Supported models ==
+^ Model ^ SS4037^ SS4074^ SS202^
+| Battery | {{ :battery_compatibility:solar_md_3.7kwh.jpg?direct&200% |}} | {{ :battery_compatibility:img_6542.jpg?direct&200% |}} | {{ :battery_compatibility:img_9807sqlogobox.jpg?direct&200% |}} |
+|ESS	|	yes|	yes|	yes|
+|Grid Backup |	yes|	yes|	yes|
+|Off-Grid |	yes|	yes|	yes|
+|Module capacity |	3.7kWh|	7,4kWh|	7,4kWh|
+|Module limit |	256|	256|	256|
+|Max capacity |	947 kWh|	1894,4 kWh|	1894,4 kWh|
+|Logger V2 |	yes|	yes|	yes|
+== Typical System overview ==
+{{:battery_compatibility:solarmd-victron_wiring.jpg?direct |}}
-^ Battery ^	SS4037 ^ SS4074	^ SS202 ^	SS237-25.6V ^
-| ESS	|	yes |	yes |	yes |	yes |
-| Grid Backup |	yes |	yes |	yes |	yes |
-| Off-Grid |	yes |	yes |	yes |	yes |
-| Module capacity |	3.7 kWh |	7.4 kWh	|7.4 kWh |	3.7kWh |
-| Module limit |	256 |	256 |	256 |	256 |
-| Max capacity |	947 kWh |	1894,4 kWh |	1894,4 kWh |	947 kWh |
 For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
@@ Line 108: / Line 121: @@
 ===== 3. CAN Bus Wiring =====
-Use any UTP cable. Plug 3 of the wires into the SOLARMD BMS. Plug the other side with RJ45 connector into the [[venus-os:start|Venus-device]].
+Use any UTP cable. Plug 3 of the wires (PIN 7, PIN 8, PIN 3) into the SolarMD LoggerV2. Plug the other side with RJ45 connector into the [[venus-os:start|Venus-device]].
 {{ :battery_compatibility:canbus_solarmd.png |}}