battery_compatibility:pylontech_phantom
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
battery_compatibility:pylontech_phantom [2019-08-22 11:16] – changed inverter parameter low voltage settings boekel | battery_compatibility:pylontech_phantom [2019-10-26 12:55] – boekel | ||
---|---|---|---|
Line 118: | Line 118: | ||
=== Charger tab === | === Charger tab === | ||
^ Parameter | ^ Parameter | ||
- | | Battery type | Lithium | | + | | Battery type | Lithium | |
| Charge curve | Fixed | | Charge curve | Fixed | ||
- | | Absorption voltage | + | | Absorption voltage |
- | | Float voltage | + | | Float voltage |
| Absorption time | 1 Hr | | | Absorption time | 1 Hr | | ||
- | Note: make sure to double check the float voltage after completing Assistants, and if necessary set it back to 53.0 V. | + | Note: make sure to double check the float voltage after completing Assistants, and if necessary set it back to 51.0 V. |
+ | |||
+ | Note For off-grid use: ignore the 'bms assistant required' | ||
=== 4.3 Inverter Settings === | === 4.3 Inverter Settings === |
battery_compatibility/pylontech_phantom.txt · Last modified: 2023-11-13 14:41 by guy_stewart