Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:dyness [2026-10-08 05:47] – guy_stewart
+++ battery_compatibility:dyness [2026-10-27 10:06] (current) – guy_stewart
@@ Line 4: / Line 4: @@
 Dyness batteries communicate with the Victron [[https://www.victronenergy.com/live/venus-os:start|GX device]] over BMS-Can.
+Note: Dyness batteries do not automatically enable DVCC on the GX device. This must be manually enabled to work correctly with Victron systems.
 ===== 1. Supported battery models =====
@@ Line 43: / Line 45: @@
   * **Remote monitoring:** [[https://www.victronenergy.com/panel-systems-remote-monitoring/vrm|VRM Portal]] (SOC, voltage, current, temperature, alarms).
-The battery BMS sends these values to the [[https://www.victronenergy.com/live/venus-os:start|GX device]]:
+Dyness batteries do not automatically enable DVCC on the GX device. This must be manually enabled to work correctly with Victron systems.
+Once DVCC is enabled; the battery BMS sends these values to the [[https://www.victronenergy.com/live/venus-os:start|GX device]]:
   * State of Charge (SOC)
   * Charge Voltage Limit (CVL)
@@ Line 50: / Line 54: @@
   * Temperature
-The [[https://www.victronenergy.com/live/venus-os:start|GX device]] sends these limits to all connected Victron inverter/chargers and solar chargers through DVCC.
+The [[https://www.victronenergy.com/live/venus-os:start|GX device]] then sends these limits to all connected Victron inverter/chargers and solar chargers.
 **Important:** Only **48 V** Victron inverter/charger models are compatible with Dyness low-voltage batteries. 12 V and 24 V models are not supported.