Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:byd_b-box [2020-04-20 14:52] – [9. Step by Step Installation Guide] guy_stewart
+++ battery_compatibility:byd_b-box [2020-09-05 05:00] – guystewart
@@ Line 1: / Line 1: @@
 ====== Victron & BYD ======
-^  Battery ^  Pro 2.5-10.0 ^  Pro 12.8 & 13.8 ^  L 3.5-14.0 ^ Premium LVL 15.4 ^ Premium LVS 3.8 ^
+^  Battery ^  Pro 2.5-10.0 ^  Pro 12.8 & 13.8 ^  L 3.5-14.0 ^ Premium LVL 15.4 ^ Premium LVS 4.0 ^
 |  Appearance |  {{ :battery_compatibility:byd-bbox2-5.jpg?nolink&100 |}}|  {{ :battery_compatibility:byd-bbox13-8.jpg?nolink&100 |}}|  {{ :battery_compatibility:byd-l3-5.jpg?nolink&100 |}}| {{:battery_compatibility:byd_premium_lvl.jpg?nolink&150|}}  |  {{:battery_compatibility:byd_lvs.jpg?nolink&80}}  |
 |  ESS |  yes|  yes|  yes|  yes|  yes|
 |  Grid Backup|  yes|  yes|  yes |   yes|  yes|
 |  Off-Grid|  yes|  yes|  no|  yes|  yes|
-|  Module capacity|  2.5 kWh |  13.8 kWh |  3.5 kWh|   15.36 kWh|  3.84 kWh|
+|  Module capacity|  2.5 kWh |  13.8 kWh |  3.5 kWh|   15.36 kWh|  4.0 kWh|
 |  Module limit |  32|  32|  12|  64|  64|
-|  Max capacity|  80 kWh|  441.6 kWh|  42 kWh|  983 kWh|  245.8 kWh|
+|  Max capacity|  80 kWh|  441.6 kWh|  42 kWh|  983 kWh|  256 kWh|
 ===== 1. Product & System compatibility =====
@@ Line 55: / Line 55: @@
 | B-BOX L 3.5-14.0     |
 | B-BOX Premium LVL 15.4     |
-| B-BOX Premium LVS 3.8     |
+| B-BOX Premium LVS 4.0     |
 BYD also releases firmware update for their BMU and BMS.
@@ Line 137: / Line 137: @@
-=== Battery Modules Required - Premium LVS 3.8 ===
+=== Battery Modules Required - Premium LVS 4.0 ===
 |Phases|          Single Phase| Three Phase| Single Phase|   Three Phase|
@@ Line 245: / Line 245: @@
 === Color Control GX Configuration ===
-The CCGX only has one available VE.Can port. It is not possible to connect both CAN products such as VE.Can MPPT (250 kbit/s) and an B-Box battery CAN-bus (500 kbit/s) together on the CCGX. As the BYD Battery MUST be connected, you will need to use the port for that. This will mean no data is collected from the VE.Can MPPT, nor can the CCGX control it. This means you are required to use the "Allow to Charge" wire configuration for the MPPT.
+The CCGX only has one available VE.Can interface. It is not possible to connect both CAN products such as VE.Can MPPT (250 kbit/s) and an B-Box battery BMS-Can CAN-bus (500 kbit/s) together on the CCGX. As the BYD Battery MUST be connected, you will need to use the port for that. This will mean no data is collected from the VE.Can MPPT, nor can the CCGX control it. This means you are required to use the "Allow to Charge" wire configuration for the MPPT.
 === GX Device with multiple CAN-bus port configuration ===