Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:bsl [2022-03-29 12:01] – dylanc
+++ battery_compatibility:bsl [2024-02-21 14:22] (current) – [5.1 Victron MPPT charger settings] warwickchapman
@@ Line 126: / Line 126: @@
 ===== 3. CAN-Bus wiring between battery and GX device =====
-In order to connect your battery to the relevant GX device, one must utilize a "Type A" cable, the Victron part number for this cable is : ASS030710018/50.
+In order to connect your battery to the relevant GX device, one must utilize a "Type B" cable, the Victron part number for this cable is : ASS030720018.
 One should always terminate the CAN port on the GX device when it comes to installing BSL batteries.
@@ Line 163: / Line 163: @@
 === 4.5 Specific manuals for various models of battery: ===
-  * 5.1kWh battery- {{ :battery_compatibility:bsl_5_1_manual_v1.pdf |}}
-  * 6.4kWh battery- {{ :battery_compatibility:bsl_6_4_manual_v1.pdf |}}
-  * 8.2kWh battery- {{ :battery_compatibility:bsl_8_2_manual_v1.pdf |}}
-  * 10.2kWh battery- {{ :battery_compatibility:bsl_power_wall_manual_v1.pdf |}}
+  * 5.1kWh battery- {{ :battery_compatibility:bslbatt_5.1k_victron_setup_guide_v1.3.pdf |}}
+  * 6.4kWh battery- {{ :battery_compatibility:bslbatt_6.4kw_victron_setup_guide_v1.3.pdf |}}
+  * 7kWh battery- {{ :battery_compatibility:bslbatt_7kw_victron_setup_guide_v1.3.pdf |}}
+  * 8.2kWh battery- {{ :battery_compatibility:bslbatt_8.2kw_8.8kw_victron_setup_guide_v1.3.pdf |}}
+  * 10.2kWh battery- {{ :battery_compatibility:bslbatt_10.2_power_wall_victron_setup_guide_v1.3.pdf |}}
+  * 15kWh battery- {{ :battery_compatibility:bslbatt_15kw_slimline_victron_setup_guide_v1.3.pdf |}}
+  * Powerline-5 battery- {{ :battery_compatibility:bslbatt_powerline-5_victron_setup_guide_v1.3.pdf |}}
 ===== 5. Solar Charging =====
@@ Line 176: / Line 177: @@
 Victron MPPT charge characteristics are automatically configured & governed by the [[venus-os:start|GX device]]. The settings below are a precautionary measure only:
+Select Battery > Preset > Smart Lithium
 ^ MPPT Parameter ^ Setting ^
 |Battery voltage     |48V|
 |Absorption voltage   |55V|
+|Float voltage   |55V|
 The MPPT should also be configured correctly in case of the GX device failing and thus not being able to throttle up or down the charging currents and voltages.