Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:bsl [2022-03-29 12:01] – dylanc
+++ battery_compatibility:bsl [2024-05-28 10:21] (current) – [5.1 Victron MPPT charger settings] per andre harisson warwickchapman
@@ Line 52: / Line 52: @@
 === Battery compatibility ===
-The following batteries are supported:
+All BSL batteries are supported by Victron.
-^ BSLBATT type ^
-| B-LFP48-100E   |
-| B-LFP48-125E       |
-| B-LFP48-160E       |
-| B-LFP48-200PW       |
@@ Line 126: / Line 121: @@
 ===== 3. CAN-Bus wiring between battery and GX device =====
-In order to connect your battery to the relevant GX device, one must utilize a "Type A" cable, the Victron part number for this cable is : ASS030710018/50.
+In order to connect your battery to the relevant GX device, one must utilize a "Type B" cable, the Victron part number for this cable is : ASS030720018.
 One should always terminate the CAN port on the GX device when it comes to installing BSL batteries.
@@ Line 138: / Line 133: @@
 | Charge curve           | Fixed   |
 | Absorption voltage     | 55 V  |
-| Absorption voltage off-grid systems  (2)| 54.8 V  |
+| Float voltage (1)         | 54.8 V  |
-| Float voltage (1)         | 55 V  |
 | Absorption time        | 1 Hr    |
@@ Line 146: / Line 140: @@
 In the Inverter tab of VEConfigure
 ^VEConfigure Inverter Parameter              ^Setting^
-|DC input low shut-down | 47V|
+|DC input low shut-down | 48V |
-|DC input low restart   | 51V|
+|DC input low restart   | 52.5V |
-|DC input low pre-alarm* | 51V|
+|DC input low pre-alarm* | 51V |
 === 4.3 ESS Settings ===
 ^ ESS Parameter ^ Settings ^
-|Sustain voltage.       | 50V|
+|Sustain voltage.       | 50V |
-|Dynamic cut-off values | set all values to 47V.|
+|Dynamic cut-off values | Set all values to 47V |
-|Restart offset:        |1.2 V (Default)|
+|Restart offset:        | 1.2 V (Default) |
+|Voltage to restart PV: | 53.5V |
 === 4.4 All Settings ===
@@ Line 163: / Line 158: @@
 === 4.5 Specific manuals for various models of battery: ===
-  * 5.1kWh battery- {{ :battery_compatibility:bsl_5_1_manual_v1.pdf |}}
-  * 6.4kWh battery- {{ :battery_compatibility:bsl_6_4_manual_v1.pdf |}}
-  * 8.2kWh battery- {{ :battery_compatibility:bsl_8_2_manual_v1.pdf |}}
-  * 10.2kWh battery- {{ :battery_compatibility:bsl_power_wall_manual_v1.pdf |}}
+  * 5.1kWh battery- {{ :battery_compatibility:bslbatt_5.1k_victron_setup_guide_v1.3.pdf |}}
+  * 6.4kWh battery- {{ :battery_compatibility:bslbatt_6.4kw_victron_setup_guide_v1.3.pdf |}}
+  * 7kWh battery- {{ :battery_compatibility:bslbatt_7kw_victron_setup_guide_v1.3.pdf |}}
+  * 8.2kWh battery- {{ :battery_compatibility:bslbatt_8.2kw_8.8kw_victron_setup_guide_v1.3.pdf |}}
+  * 10.2kWh battery- {{ :battery_compatibility:bslbatt_10.2_power_wall_victron_setup_guide_v1.3.pdf |}}
+  * 15kWh battery- {{ :battery_compatibility:bslbatt_15kw_slimline_victron_setup_guide_v1.3.pdf |}}
+  * Powerline-5 battery- {{ :battery_compatibility:bslbatt_powerline-5_victron_setup_guide_v1.3.pdf |}}
 ===== 5. Solar Charging =====
@@ Line 176: / Line 172: @@
 Victron MPPT charge characteristics are automatically configured & governed by the [[venus-os:start|GX device]]. The settings below are a precautionary measure only:
+Select Battery > Preset > Smart Lithium
 ^ MPPT Parameter ^ Setting ^
 |Battery voltage     |48V|
 |Absorption voltage   |55V|
+|Float voltage   |54.8V|
 The MPPT should also be configured correctly in case of the GX device failing and thus not being able to throttle up or down the charging currents and voltages.