Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:bluenova [2019-08-26 15:07] – [2. BlueNova product range] dirkbluenova
+++ battery_compatibility:bluenova [2019-08-27 08:12] – guy_stewart
@@ Line 1: / Line 1: @@
+====== Victron Energy and BlueNova Energy LiFePo4 Batteries ======
-Victron Energy and BlueNova Energy LiFePo4 Batteries
 The BlueNova Energy (www.bluenova.co.za) range of Lithium Iron Phosphate batteries is compatible with Victron products in various systems.
-.1Product and System Compatibility
+=== 1.1 Product and System Compatibility ===
 Victron + BlueNova can be used for the following systems
@@ Line 12: / Line 11: @@
 .Energy Storage
-.2Colour Control GX or VenusGX is required**
+=== 1.2 Colour Control GX or VenusGX is required ===
 When used with BlueNova Batteries the minimum ﬁrmware version for the Colour Control / Venus G X is v2.02. It is recommended to always use the latest Firmware version for the Colour Control/Venus GX.
-.3All 48V Multi’s, MultiPlus, MultiPlus II, Multigrids and Quattros are compatible
+=== 1.3 All 48V Multi’s, MultiPlus, MultiPlus II, Multigrids and Quattros are compatible ===
 When the BlueNova battery is installed in a Victron ESS installation, which is the best solution for Energy Storage Systems, there is no need for additional control wiring. For other systems, such as oﬀ- grid systems and backup systems, the internal BMS controls will control deep discharge and overcharge conditions. Please contact BlueNova for more information. For more Victron-related settings see the VEConﬁgure section below
@@ Line 22: / Line 21: @@
-.BlueNova Energy product range
+==== 2.BlueNova Energy product range ====
 The BlueNova range is supplied with a BMS as standard on  all  current  models  of  batteries  . See the BlueNova product page for more details on the various options.
@@ Line 28: / Line 27: @@
 ==== 3. Wiring of Can.Bus cable between BlueNova and CCGX. ====
-{{:battery_compatibility:bluenova_battery.png?400|}}
+{{https://www.victronenergy.com/live/_media/battery_compatibility:bn52v-77-4k_ng.jpg}}
+No RJ45 cable is supplied for this connection .
+Plug the CCGX/VenusGX side of the cable into one of the VE.Can sockets on the back of the CCGX/VenusGX. Plug the other end into the battery at one of the RJ45 CANbus ports.                   A  VE.Can terminator is  not   nescessary  for  the other VE.Can socket on the CCGX/VenusGX.
+Without properly connecting this cable, the battery will stop charging/discharging after several minutes. Also, the battery will not show up on the display of the CCGX/VenusGX.
@@ Line 39: / Line 41: @@
-An RJ45 cable is supplied with each BlueNova battery.
-Plug the CCGX side of that cable into one of the VE.Can sockets on the back of the CCGX. Plug the other end into the battery. Then, plug a VE.Can terminator in the other VE.Can socket on the CCGX. Two VE.Can terminators are included with the package of the CCGX as an accessory – only one is used. Keep the other one as a spare.
-Without properly connecting this cable, the battery will stop charging/discharging after several minutes. Also, the battery will not show up on the display of the CCGX.
 ==== 4. VEConfigure settings ====
@@ Line 49: / Line 47: @@
 === 4.1 Charge parameters ===
-{{:battery_compatibility:bluenova_charge_settings_v1.png?400|}}
+{{https://www.victronenergy.com/live/_media/battery_compatibility:battery_parameters.jpg}}
@@ Line 116: / Line 114: @@
 It is recommended to make these settings using the VictronConnect App and Bluetooth.
+** - All latest GX devices applicable.
 ===== DISQUS =====
 ~~DISQUS~~