Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:bluenova [2019-08-26 15:07] – [2. BlueNova product range] dirkbluenova
+++ battery_compatibility:bluenova [2019-08-26 16:31] – [6. Configure MPPT] dirkbluenova
@@ Line 28: / Line 28: @@
 ==== 3. Wiring of Can.Bus cable between BlueNova and CCGX. ====
-{{:battery_compatibility:bluenova_battery.png?400|}}
+{{https://www.victronenergy.com/live/_media/battery_compatibility:bn52v-77-4k_ng.jpg}}
+No RJ45 cable is supplied for this connection .
+Plug the CCGX/VenusGX side of the cable into one of the VE.Can sockets on the back of the CCGX/VenusGX. Plug the other end into the battery at one of the RJ45 CANbus ports.                   A  VE.Can terminator is  not   nescessary  for  the other VE.Can socket on the CCGX/VenusGX.
+Without properly connecting this cable, the battery will stop charging/discharging after several minutes. Also, the battery will not show up on the display of the CCGX/VenusGX.
@@ Line 39: / Line 42: @@
-An RJ45 cable is supplied with each BlueNova battery.
-Plug the CCGX side of that cable into one of the VE.Can sockets on the back of the CCGX. Plug the other end into the battery. Then, plug a VE.Can terminator in the other VE.Can socket on the CCGX. Two VE.Can terminators are included with the package of the CCGX as an accessory – only one is used. Keep the other one as a spare.
-Without properly connecting this cable, the battery will stop charging/discharging after several minutes. Also, the battery will not show up on the display of the CCGX.
 ==== 4. VEConfigure settings ====
@@ Line 49: / Line 48: @@
 === 4.1 Charge parameters ===
-{{:battery_compatibility:bluenova_charge_settings_v1.png?400|}}
+{{https://www.victronenergy.com/live/_media/battery_compatibility:battery_parameters.jpg}}
@@ Line 116: / Line 115: @@
 It is recommended to make these settings using the VictronConnect App and Bluetooth.
+** - All latest GX devices applicable.
 ===== DISQUS =====
 ~~DISQUS~~