Differences

This shows you the differences between two versions of the page.

--- assistants:three_phase_pv_inverter_assistant [2014-08-03 23:18] – mvader
+++ assistants:three_phase_pv_inverter_assistant [2019-01-22 10:16] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Three phase installation with the PV Inverter support Assistant ======
+====== PV Inverter Assistant in a three phase installation on 2xx ======
 Notes
-  * For systems that have the new microprocessor (7 digit firmware numbers starts with 26 or 27 instead of 19 or 20), use the Self-consumption Hub-2 v3 Assistant instead. It is easier to configure the prioritization of solar power and offers more features.
   * This page shows VE.Bus System Configurator. Note that it is also possible to use VE,Bus Quick Configure.
+  * The channels configuration, which is what makes this a bit more complicated than usual, is only necessary on 2xx firmware. On new firmware (4xx), this is all done automatically behind the scenes.
 ===== Step by step instructions =====
-Select Phase 1 and right click to access VE Configure
+Select Phase 1 and right click on the Multi icon to access VE Configure:
 {{:three_phase_grid_converter_assistant:1.png|}}
@@ Line 46: / Line 46: @@
+===== DISQUS =====
 ~~DISQUS~~