Differences

This shows you the differences between two versions of the page.

--- assistants:three_phase_pv_inverter_assistant [2014-07-26 00:28] – mvader
+++ assistants:three_phase_pv_inverter_assistant [2019-01-22 10:16] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== NOTE: this page will need updating for Self-consumption Hub-2 v3 =====
+====== PV Inverter Assistant in a three phase installation on 2xx ======
-Here follows the only way to configure a 3 phase system using the Grid Converter assistant.
+Notes
+  * This page shows VE.Bus System Configurator. Note that it is also possible to use VE,Bus Quick Configure.
+  * The channels configuration, which is what makes this a bit more complicated than usual, is only necessary on 2xx firmware. On new firmware (4xx), this is all done automatically behind the scenes.
-The Ideal Program is the VE Bus Quick Configure but for this document the VE Bus System Configurator will be used.
+===== Step by step instructions =====
-Select Phase 1 and right click to access VE Configure
+Select Phase 1 and right click on the Multi icon to access VE Configure:
 {{:three_phase_grid_converter_assistant:1.png|}}
@@ Line 45: / Line 47: @@
+===== DISQUS =====
+~~DISQUS~~