Differences

This shows you the differences between two versions of the page.

--- assistants:self_consumption_hub-1 [2016-11-07 17:36] – mvader
+++ assistants:self_consumption_hub-1 [2019-01-22 10:16] (current) – external edit 127.0.0.1
@@ Line 7: / Line 7: @@
 ===== When to use the hub-1 Assistant? =====
-Use the Assistant for these systems with Solar chargers, ie. dc-coupled solar power:
+Use the Assistant for these systems with Solar chargers, where you want to disconnect from mains when possible. Which is the third policy on the list.
-  * Grid that allows feed-back
-  * Grid that does not allow feed-back
-  * Grid + a backup generator
+Usage of all other policies of Hub-1 have been deprecated, in favor of [[ess:start|ESS]].
-Do not use this Assistant for the following systems, even though they have solar chargers:
+Besides below information, there is more information about Hub-1 here:
-  * No grid nor generator; solar only
-  * Only a generator connected to the ac-input of the Multi or Quattro, no grid.
-More information:
-  * [[https://www.victronenergy.com/blog/2014/03/07/hub-1-available/|blog post on hub-1]].
-  * [[assistants:self_consumption_hub-1_policy-5]]
   * [[https://www.victronenergy.com/blog/2016/06/10/color-control-gx-v1-51-released/|blog post about using a CCGX as a communication hub between a Multi (or Quattro) and one or more VE.Direct chargers]]
+  * [[assistants:hub1_and_hub2_notes|]]
 ===== Frequently asked questions =====
@@ Line 27: / Line 20: @@
 === Do I need to use the VE.Bus to VE.Can interface cable? ===
-No, not anymore since CCGX v1.73.
+No, not anymore since CCGX v1.73. See [[https://www.victronenergy.com/blog/2016/11/07/ccgx-v1-73-hub-1-byd-b-box-and-more-lithium-batteries/|v1.73 blogpost]] for details.
 === What happens when there is to power to be fed back, but there is no grid available? ===
@@ Line 45: / Line 38: @@
 A maximum of 25 units can be connected in parallel.
+===== DISQUS =====
 ~~DISQUS~~