Differences

This shows you the differences between two versions of the page.

--- assistants:overview_of_available_assistants [2020-08-16 13:23] – [AC Current sensor] jono
+++ assistants:overview_of_available_assistants [2022-06-01 13:41] (current) – Fixed typo. fredhen
@@ Line 104: / Line 104: @@
 {{:assistants:85fa9bbfa1ab60f30e018fae30f2b3c2.png?direct&150 }}Used to wire an emergency stop button to a VE.Bus system.
-==== VE.Bus BMS support ====
+==== DEPRECATED VE.Bus BMS support ====
-{{:assistants:d4c13a7dba68a0ac07ef946122785e57.png?direct&150 }}Required in combination with a [[https://www.victronenergy.com/batteries/lithium-battery-12,8v|VE.Bus BMS, used with our 12.8 V Lithium batteries]]. This Assistant communicates with the BMS and controls the Multi based on the BMS measurements.
+{{:assistants:d4c13a7dba68a0ac07ef946122785e57.png?direct&150 }}
+Deprecated: per VE.Bus firmware version 489, this Assistant is no longer required. When installing a system with VE.Bus BMS, our advice is to first update the firmware of the inverter, using VictronConnect, and thereafter do the configuration. No Assistant needed.
+Required in combination with a [[https://www.victronenergy.com/batteries/lithium-battery-12,8v|VE.Bus BMS, used with our 12.8 V Lithium batteries]]. This Assistant communicates with the BMS and controls the Multi based on the BMS measurements.
 ==== Two-Signal BMS support (previously called Lynx Ion BMS support) ====