Differences

This shows you the differences between two versions of the page.

--- assistants:how_to_add_and_configure_an_assistant [2014-08-26 20:51] – mvader
+++ assistants:how_to_add_and_configure_an_assistant [2021-09-17 09:11] (current) – mvader
@@ Line 6: / Line 6: @@
 ==== Prerequisite ====
-To work with Assistants, VE.Bus Multis, Inverters and Quattros must be loaded with a a different firmware first. More information about which firmware type to choose for an installation, and the updating instruction, is available in our PDF [[http://www.victronenergy.com/upload/documents/manual-VE.Bus-firmware-versions-explained-EN.pdf|VE.Bus firmware versions explained]].
+To work with Assistants, VE.Bus Multis, Inverters and Quattros must be loaded with a a different firmware first. More information about which firmware type to choose for an installation, and the updating instruction, is available in our PDF [[https://www.victronenergy.com/upload/documents/manual-VE.Bus-firmware-versions-explained-EN.pdf|VE.Bus firmware versions explained]].
 ==== Step by step instructions ====
@@ Line 20: / Line 20: @@
 {{:how_to_make_assistant_settings:02.png}}
-The assistant will appear in the ‘Used assistants’ box but it will be Italic since it has not been configured yet.
+The assistant will appear in the ‘Used assistants’ box and it will be in italics, as it has not been configured yet.
 Now Click on Start assistant
@@ Line 72: / Line 72: @@
 {{:how_to_make_assistant_settings:14.png}}
-~~DISQUS~~