Differences

This shows you the differences between two versions of the page.

--- actor_offgrid [2019-05-24 13:47] – lucian
+++ actor_offgrid [2023-10-25 15:36] (current) – bob
@@ Line 1: / Line 1: @@
-====== MyPv Ac-Thor and Victron Energy Off-Grid ======
+====== my-PV AC-Thor and Victron Energy Off-Grid ======
-For an Off-Grid system. when the batteries are full and we still have PV power available, that power is lost. We could use that power and send it to a boiler or something similar. For this we are using a device from My PV called AC-Thor.
+For an Off-Grid system. when the batteries are full and we still have AC coupled PV power available, that power is lost. We could use that power and send it to a boiler or something similar. For this we are using a device from my-PV called AC-Thor.
-The schematic for this kind of system looks like this:
+The schematic for this kind of system looks like this (the meter from my-PV is not needed in this setup):
 {{::offgrid_-_acthor_integration_for_lucian.png?nolink|}}
@@ Line 9: / Line 9: @@
 First setup:
-Ac-Thor device must be connected on the AC output of the Multi/Quattro.
+AC-Thor device must be connected on the AC output of the Multi/Quattro just like the AC coupled PV inverter.
@@ Line 31: / Line 31: @@
 {{::ac_thor_frequency_values.jpg?nolink&800|}}
-On the Multiplus or Quattro, using Ve.config, add the PV Inverter support Assinstant
+On the Multiplus or Quattro, using Ve.config, add the PV Inverter support Assistant.
+-> The correct working of the frequency shift in the PV Inverter assistant needs to physically have a PV inverter installed on ACout which can feed into the Victron system.