Differences

This shows you the differences between two versions of the page.

--- actor_offgrid [2019-05-24 13:12] – created lucian
+++ actor_offgrid [2023-10-25 15:36] (current) – bob
@@ Line 1: / Line 1: @@
-====== MyPv Ac-Thor and Victron Energy Off-Grid ======
+====== my-PV AC-Thor and Victron Energy Off-Grid ======
+For an Off-Grid system. when the batteries are full and we still have AC coupled PV power available, that power is lost. We could use that power and send it to a boiler or something similar. For this we are using a device from my-PV called AC-Thor.
+The schematic for this kind of system looks like this (the meter from my-PV is not needed in this setup):
+{{::offgrid_-_acthor_integration_for_lucian.png?nolink|}}
+First setup:
+AC-Thor device must be connected on the AC output of the Multi/Quattro just like the AC coupled PV inverter.
+Using the device touch screen, select Information menu and go to the third screen to find the current IP address.
+{{:ac_thor_ip_address.jpg?nolink|}}
+Open a browser, put that IP address into the address field and press enter
+The webpage should look like this:
+{{::ac_thor_main_page.jpg?nolink|}}
+Please check the firmware version on AC-Thor device, must be at least a0010006.
+Go to setting and select the “Mode”. For ESS select ”Hot water 3KW”, for off-grid systems, select  “Frequency-Mode”.
+{{::ac_thor_frequency.jpg?nolink&800|}}
+Go to Frequency-Modus and define Frequency start value 50.1Hz and the Frequency end value 51Hz.
+{{::ac_thor_frequency_values.jpg?nolink&800|}}
+On the Multiplus or Quattro, using Ve.config, add the PV Inverter support Assistant.
+-> The correct working of the frequency shift in the PV Inverter assistant needs to physically have a PV inverter installed on ACout which can feed into the Victron system.
-For an Off-Grid system. when the batteries are full and we still have PV power available, that power is lost. We could use that power and send it to a boiler or something similar. For this we are using a device from My PV called AC-Thor.
-The schematic for this kind of system looks like this: